Users Manual

DELTA ELECTRONICS, INC. Jun., 2021
DOCUMENT : DELVW-213-001
REVISION : A4
PAGE : 3 OF 7
 VWPEN16C-30ACAPB Specification
Input Specifications
Parameter SYMBOL CONDITIONS MIN TYP MAX UNITS
Input Operating Voltage VIN Measured position: input connector 9 13.5 16 V
Transient Voltage Excursions MAX
VIN
MAX
The voltage may deviate VIN MAX
+2.0VDC for up one (1) second due
to load events
18 V
Transient Voltage Excursions MIN
VIN
MIN
The voltage may deviate VIN MIN
-2.0VDC for up one (1) second due
to load events
7 V
Standby Power Psb VIN= 13.5V 1 W
Input Operating current Icc VIN= 9V 5.6 A
Output Specifications
Parameter SYMBOL CONDITIONS MIN TYP MAX UNITS
Recommend Charging Distance Range D
VIN = 13.5V, from WCM interface
surface to Rx coil surface, Rx is on
the center of Tx coil
0 5 mm
The Number of Devices Qty
The device are charged at the same
time
2 Pcs
Support Max Power for Rx Pout VIN = 13.5V, Rx output power 15 W
Protection
Parameter SYMBOL CONDITIONS MIN TYP MAX UNITS
VIN UVP Threshold Vuv
Pout = 0W
shut down, auto recovery
6.2 6.5 6.8 V
VIN UVP Recovery Vuv R
Pout = 0W
Recovery voltage from UVP
8.7 9.0 9.3 V
VIN OVP Threshold Vov
Pout = 0W
shut down, auto recovery
17.2 17.5 17.8 V
VIN OVP Recovery Vov R
Pout = 0W
Recovery voltage from OVP
15.7 16.0 16.3 V
UVP and OVP Delay Delay 1.5 2.0 2.5 s
FOD Detection FOD Meet Qi spec
Issued