TABLE OF CONTENTS Important Safety Information ............................... 5 Symbols Used .............................................................. 5 General Safety Information ............................................ 6 .......... 6 Z1H Installation Notice ......................................... Power Supply Safety ..................................................... 7 Cleaning Qumi ............................................................. 7 Control Warning ..............................
Making Connections............................................ 19 Connecting to a Wi-Fi Network ....................................... 20 Using the Projector ............................................ 23 Adjusting the Focus ..................................................... 23 Playing Media Files from a Storage Device (USB Flash Drive, microSD Card) ............................................................ 24 Screencasting with a Mobile Device .................................
Tips .......................................................................... 46 System Reset Method (Reboot) ...................................... 46 Image Problems .......................................................... 47 Remote Control Problems .............................................. 47 Audio Problems ........................................................... 47 FAQs ......................................................................... 48 Vivitek Support Site ..........................
IMPORTANT SAFETY INFORMATION IMPORTANT: It is strongly recommended that you read this section carefully before using Z1H. These safety and usage instructions will make sure you enjoy many years of safe use of Z1H. Keep this manual for future reference. Symbols Used Warning symbols are used on the unit and in this manual to alert you of hazardous situations. The following symbols are used to call attention to important information. NOTE: Provides additional information on the topic at hand.
General Safety Information Do not open the casing. There are no user-maintainable parts inside the machine. For any maintenance, please contact a qualified service technician. Follow all warnings and precautions on the machine or in this Manual. According to its design, the projection light source is extremely bright. To avoid harm to your eyes, do not look straight at the lens when the LED is ON. Do not place the machine on unstable surface or stand.
Power Supply Safety Only use the supplied adapter. Do not place anything on the cord. Place the cord where it will not be in the way of foot traffic. Remove the battery from the remote control when storing or not in use for a prolonged period. Cleaning Qumi Before cleaning, disconnect the power supply cables. Refer to Powering On/Off the Projector on page 17. NOTE: Qumi Z1H will be warm after usage. Allow Z1H to cool down before storing away.
REGULATORY COMPLIANCE FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
INTRODUCTION About this Manual This manual is intended for end users and describes how to install and operate Z1H. Wherever possible, relevant information—such as an illustration and its description—has been kept on one page. This printer-friendly format is both for your convenience and to help save paper, thereby protecting the environment. It is suggested that you only print sections that are relevant to your needs.
PACKAGE CONTENTS Qumi Z1H Remote Control Adapter Carry Bag Documentation - 10 -
YOUR PROJECTOR Front-Left View 1 4 2 3 1 Front IR Sensor 3 Front Speaker 2 Lens 4 Focus Dial Rear View 1 6 2 7 8 3 9 4 10 5 1 microSD slot 6 Rear IR Sensor 2 Audio Out (3.
Top View 6 1 7 2 8 9 3 10 11 4 5 1 Menu Button 5 Power Button 2 Up Button 6 Indicator 3 7 Left Button 4 Home Button Projector Mode Bluetooth Speaker Mode Exit Button Right Button 10 Down Button 11 Bluetooth® Speaker Mode Button 8 Enter Button LED Behavior and Definition Projector Status Powered Off LED Status 9 Adapter Disconnected Adapter Connected Red: Charging Off Green: Fully Charged Blinking Red: Low Battery Red: Charging Green: Projecting Green: Projecting With Battery F
Bottom View 1 1 Tripod Connector - 13 -
REMOTE CONTROL Remote Control Keypad 8 1 9 2 10 3 11 4 12 13 5 14 6 15 7 1 Power ON/OFF 6 Volume ‒ 11 Enter 2 Menu 7 Audio Mode 12 Right 3 Up 8 Home 13 Down 4 Left 9 Mouse 14 Mode 5 Volume + Bluetooth® Speaker 10 Exit 15 Mute - 14 -
Activating the Remote Control Battery When using the remote control for the first time, the plastic sticker covering the battery must be removed. To remove the plastic sticker, pull the tab at the bottom side of the remote control to remove the plastic sticker from the battery compartment. Replacing the Remote Control Battery To replace the remote control battery: 1. Rotate the battery compartment cover counter-clockwise so the line on the cover points to the single dot on the remote control. 2.
POWERING/CHARGING THE PROJECTOR To supply power to the Z1H: 1. Connect the power cable to a power socket 2. Connect the power cable to the supplied adapter. 3. Connect the adapter cable to the DC In port on the projector. 4. Once the adapter and power cable are connected to the projector, the LED status indicator on the top of the projector will illuminate indicating the charge status (refer to Top View on page 12 for more information on LED behavior).
Powering On/Off the Projector To power on the projector: 1. Press the power ( ) button on the top of the projector or the power ( ) button on the remote control. IMPORTANT: The remote control can only power on the projector when the projector is connected to a power supply. 2.
To power off the projector: 1. Press the power ( ) button on the top of the projector or the power ( ) button on the remote control. 2. A message will appear on the projected screen to confirm power off. Select OK and press the enter ( ) button.
MAKING CONNECTIONS 1 4 2 5 3 6 No.
Connecting to a Wi-Fi Network To connect the projector to a wireless network: 1. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. 2. Select the Connectivity button on the home screen and press the enter ( ) button. 3. Select the Wi-Fi button on the Connectivity screen and press the enter ( 4. Select Wi-Fi in the Network menu and press the enter ( - 20 - ) button. ) button.
5. Select Wi-Fi in the Wi-Fi menu and press the enter ( 6. Select On in the Wi-Fi menu and press the enter ( ) button. ) button. 7. Select the Wi-Fi network you want to connect to and press the enter ( ) button. If the Wi-Fi network you want to connect to features a password, enter the password when prompted.
Once you have successfully connected to a Wi-Fi network a Connected status will be listed under the network you have connected to. Press the exit ( ) button to return to the home screen where a Wi-Fi connection icon will appear at the top right corner of the screen.
USING THE PROJECTOR Adjusting the Focus To adjust the focus of the projected image, rotate the dial on the side of the projector until correct focus is achieved.
Playing Media Files from a Storage Device (USB Flash Drive, microSD Card) To play a media file (video, photos, music) from a storage device: 1. Connect the device to the projector. Refer to the Making Connections section on page 19. 2. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. NOTE: If you are already playing media from a different source press the home ( ) or exit ( ) button on the keypad or remote control to return to the home screen. 3.
5. Select the storage device with the media file you want to play in the Media Player menu and press the enter ( ) button. 6. Navigate to the file folder where the media file is located in the storage device. 7. Select the media file you want to play and press the enter ( ) button. NOTE: If the file folder contains multiple types of media files you may use the PICTURE, SONG, or VIDEO buttons on the left side of the menu to specify the media files shown by type.
8. The media player will begin playing the media file on the projected screen. The media player’s interface and available options will depend on the type of media being played.
Icon Function Availability (Player Type) Description Previous Video, Photo, Music Select to go to the previous file Play / Pause Video, Photo, Music Select to pause play; Select again to resume play Next Video, Photo, Music Select to go to the next file Information Video, Photo, Music Select to view the file information Playlist Video, Music Select to view or select another file on the playlist Rewind Video Select to rewind at 2x, 4x, 8x, 16x, or 32x speed Fast Forward Video Select t
Screencasting with a Mobile Device 1. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. 2. Connect the projector to a Wi-Fi network. Refer to the Connecting to a Wi-Fi Network section on page 20. 3. Connect your mobile device to the same Wi-Fi network as the projector. 4. For iOS devices open the AirPlay menu on your mobile device. For Android devices open the Screencasting menu on your mobile device. 5.
Playing from a Video Source (HDMI) To project a video from a device connected to the HDMI port: 1. Connect the device to the projector. Refer to the Making Connections section on page 19. 2. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. NOTE: If you are already viewing video or playing music from a different source press the home ( ) or exit ( ) button on the keypad or remote control to return to the home screen. 3.
NOTE: Press the enter ( ) button on the keypad or remote control to view information on the video source. Playing from a Video Source (Type-C / DisplayPort) To project a video from a device connected to the Type-C (DisplayPort) port: 1. Connect the device to the projector. Refer to the Making Connections section on page 19. NOTE: Z1H only supports playing video via the Type-C port from devices with DisplayPort functionality. 2. Power on the projector.
4. The video will automatically be projected onto the screen. 5. To control the video playback, use the control options directly from the video source. Press the exit ( ) button on the keypad or remote control to return to the home screen. NOTE: Press the enter ( ) button on the keypad or remote control to view information on the video source. Viewing Documents from a Storage Device (USB Flash Drive, microSD Card) To view a document from a storage device: 1. Connect the device to the projector.
3. Using the keypad or remote control, select Productivity from the home screen and press the enter ( ) button. 4. Select WPS Office in the Productivity menu and press the enter ( ) button. 5. Select Open then press the enter ( ) button, and then select Folders in the WPS Office main screen then press the enter ( ) button. 6. Navigate to the file folder where the document is located in the storage device. 7. Select the document you want to view and press the enter ( - 32 - ) button.
BLUETOOTH ® CONNECTIONS Using the Bluetooth ® Speaker You can use Z1H as a speaker to play music from mobile devices wirelessly. To use the projector as a speaker: 1. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. 2. Press the Bluetooth® Speaker Mode ( control to enable Bluetooth ® ) button on the keypad or the remote on the projector. 3.
4. Enable Bluetooth® on your mobile device and select Z1H in your mobile device’s Bluetooth® pairing menu. NOTE: Once paired your mobile device will automatically connect to the projector. Each subsequent time your mobile device is within range of the projector and Bluetooth® is enabled on both devices they will automatically connect to each other. 5. Play music on your mobile device. To deactivate Bluetooth® Speaker Mode: 1.
Connecting the Projector to Bluetooth Devices You can also connect Z1H to other Bluetooth devices, such as an external speaker, headphones, or mouse/keyboard. To connect the projector to a Bluetooth device: 1. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. 2. Using the keypad or remote control, select the Connectivity button on the home screen and press the enter ( ) button. 3. Select Bluetooth in the Connectivity menu and press the enter ( 4.
5. Select your Bluetooth device from the devices list in the Bluetooth menu. NOTE: It may take some time for your device to appear in the devices list in the Bluetooth menu. If after some time you are still unable to find your device in the devices list, ensure that your device is set to pairing mode and then select the options ( ) button at the top-right corner of the Bluetooth menu and select Refresh. 6.
THE HOME SCREEN The home screen for Z1H allows you to view status indicator icons, and access category menus, the system settings menu, and app shortcuts: Item Description Status Indicator Icons Icons indicating the status for storage media inputs, Bluetooth connection, Wi-Fi connection, and battery charge. Entertainment Accesses the menu featuring apps related to playing media files. See Playing Media Files from a Storage Device (USB Flash Drive, microSD Card) on page 24.
Customizing the App Shortcuts on the Home Screen To configure the apps included in the app shortcuts section of the home screen: NOTE: A maximum of 8 app shortcuts are allowed in the app shortcut section. 1. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. 2. Using the keypad or remote control, select the + button on the home screen and press the enter ( ) button. 3.
Customizing the Category Menus To configure the apps included in a category menu: 1. Power on the projector. Refer to the Powering On/Off the Projector section on page 17. 2. Using the keypad or remote control, select the category menu you want to customize and press the enter ( ) button. 3. Select Add in the category menu and press the enter ( ) button. 4. Select the app you want to add to the category menu and press the enter ( ) button so that a green checkmark is shown above the app icon.
USING THE SETTINGS MENUS The projector features two separate menus to help you configure the projector’s settings: The Projector Settings Menu - Allows you to configure the projector’s hardware settings such as picture, sound, and screen related settings. The System Settings Menu - Allows you to configure the projector’s system settings such as network, app, date/time, language related settings. The Projector Settings Menu To access the Projector Settings menu: 1.
The following table describes the various sub-menus and the options available in the Projector Settings menu: Sub-Menu Display Sound Mode Item Presentation Switches the display settings to pre-defined settings ideal for presentations. Bright Switches the display settings to pre-defined settings that maximize brightness. Movie Switches the display settings to pre-defined settings ideal for movies.
The System Settings Menu To access the System Settings menu: 1. Select Settings on the home screen and then press the enter ( remote control or the keypad. 2. The System Settings menu will appear on the projected screen. ) button on the 3. Use the following keys on either the remote control or the keypad to navigate the Sytem Settings Menu: • Up ( ) or Down ( sub-menu option.
DEVICE SETTINGS Category Sub-Menu Network System Sounds Description Allows you to configure your Wi-Fi connection, setup a Wi-Fi hotspot, and configure screen casting capabilities. Enables/Disables system-related sounds (such as clicking, and prompt sounds). Apps Allows you to control operations, view information, configure settings, and define system access/permissions for individual apps.
PREFERENCES Category Preferences Sub-Menu Date & time Description Allows you to set the date and time automatically (via a network connection) or manually. Language Allows you to select the language for the system. Keyboard Allows you to select and configure the keyboard. REMOTE & ACCESSORIES SETTINGS Category Remote & accessories Sub-Menu Description Add Accessory Allows you to connect your projector to other Bluetooth devices.
PERSONAL SETTINGS Category Menu Item Personal Account Setup Description Sets up an account to download apps and use webrelated services - 45 -
TROUBLESHOOTING/FAQ These guidelines provide tips to deal with problems you may encounter while using Qumi. If the problem remains unresolved, contact your dealer for assistance. The problem sometimes can be as simple as improper connection of cables. Review the following possible issues before proceeding to the problem-specific solutions. Use another electrical device to confirm that the electrical outlet is properly working. Make sure that Qumi is turned on.
Image Problems Problem: No image appears on the screen. 1. Check whether the source (PC, Flash Drive, DVD Player, Set-top Box, etc.…) is properly configured. 2. Turn off all of the equipment and power up the equipment again in the correct order. Problem: The image is blurred. 1. Adjust the focus directly via the focus dial on the projector. 2. Ensure that the distance between the Qumi and the screen is within specified range. 3. Clean Qumi lens with optical lens cleaning cloth if it is dirty.
3. If using Bluetooth, ensure that Qumi is in Bluetooth mode on and ensure that pairing has occurred. 4. Have Qumi serviced. Problem: The sound is unstable in Bluetooth speaker mode 1. Check to make sure that Qumi is within ranch of your Bluetooth device (Smartphone, Tablet, etc.). 2. Use another Bluetooth speaker to test the output of the audio source. 3. Have Qumi serviced. FAQs 1.
6. What type of video formats does Qumi support? AVI//VOB/MOV/MKV/DAT/MPG/MP4 7. What type of audio formats does Qumi support? MP3/WMA/M4A/AAC 8. What type of photo formats does Qumi support? JPG/JPEG/BMP/PNG 9. What type of document formats does Qumi support? Microsoft® Office 97-2010 (Word, Excel®, PowerPoint®), Adobe® PDF (1.0, 1.1, 1.2, 1.3, 1.4). 10. How long will the LED light source in Qumi last and can it be replaced? Qumi does not use a typical light source.
ADDITIONAL INFORMATION Projection Distance vs Projection Size Projection Distance (cm/inch) Image Diagonal (cm/inch) Image Width (cm/inch) Image Height (cm/inch) 40 /15.8 35.5 / 14.0 30.1 / 11.8 18.8 / 7.4 60 / 23.6 53.2 / 20.9 45.1 / 17.8 28.2 / 11.1 80 / 31.5 70.9 / 27.9 60.2 / 23.7 37.6 / 14.8 100 39.4 88.7 / 34.9 75.2 / 29.6 47.0 / 18.5 120 / 47.2 106.4 / 41.9 90.2 / 35.5 56.4 / 22.2 140 / 55.1 124.1 / 48.9 105.3 / 41.4 65.8 / 25.9 160 / 63.0 141.9 / 55.9 102.3 / 47/4 75.
Timing Mode Table Signal VESA Apple® Mac SDTV EDTV HDTB Resolution Horizontal Synchronization [KHz] Vertical Synchronization [HZ] DVI/HDMI 720x400 37.9 85 O 640x480 31.5 60 O 640x480 37.9 72 O 640x480 37.5 75 O 640x480 43.3 85 O 800x600 35.2 56 O 800x600 37.9 60 O 800x600 48.1 72 O 800x600 46.9 75 O 800x600 53.7 85 O 1024x768 48.4 60 O 1024x768 56.5 70 O 1024x768 60 75 O 1024x768 68.7 85 O 1280x800 49.7 59.8 O 1280x800 62.8 74.
Specifications Specifications Model No.: Z1H Native Resolution HD 720p (1280 x 720) Maximum Resolution 1080p (1920 x 1080) Throw Ratio (Distance/Width) 1.33:1 (Manual Adjustment Focus) Image Size (Diagonal) 0.4m - 2.6m (15.7in - 102.4in) Projection Distance 0.5m - 3.0m (1.6ft - 9.8ft) Aspect Ratio 16:9 Native Keystone Correction Vertical ±30°(Auto Keystone) Operating System AndroidTM Wireless Yes (Internal IEEE 802.11 b/g/n (2.4GHz)) Bluetooth® Device Connectivity Yes (Bluetooth® 4.
Vivitek Americas 46101 Fremont Blvd, Fremont, CA 94538 U.S.A. T: +1-510-668-5100 F: +1-510-668-0680 Vivitek Asia 7F, No. 186, Ruey Kuang Road, Neihu, Taipei 11491 Taiwan R.O.C. T: +886-2-8797-2088 F: +886-2-6600-2358 Vivitek Europe Zandsteen 15, 2132 MZ Hoofddorp The Netherlands T: +31-20-800-3960 F: +31-20-655-0999 www.vivitekcorp.
