Installation Manual

ManualsBrandsDELTA FAUCET ManualsKitchen & Bath FixturesDelta Faucet Leland Single-Handle Kitchen Sink Faucet with Pull Down Sprayer, ShieldSpray Technology and Magnetic Docking Spray Head, SpotShield Stainless 9178-SP-DST

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

Models/Modelos/Modèles

Leland

, Esque™ & Addison™

06/01/2017 Rev. Awww.deltafaucet.com

WARNING: THIS FAUCET IS NOT TO BE USED WITH PORTABLE

DISHWASHERS!

ADVERTENCIA: ¡SESTA LLAVE NO SE DEBE UTILIZAR CON MAQUINAS

LAVAPLATOS PORTATILES!

AVERTISSEMENT: ON NE DOIT PAS BRANCHER UN LAVE-VAISSELE

PORTATIF SUR CE ROBINET!

HIGH-RISE PULL-DOWN KITCHEN WITH SHIELDSPRAY™

AND BAR / PREP FAUCETS

LLAVES DE AGUA-GRIFOS PARA BAR/PREPARATIVOS

CUELLO DE GANSO EXTRAÍBLES CON SHIELDSPRAY™

ROBINETS COL-DE-CYGNE POUR ÉVIER DE CUISINE AVEC

TECHNOLOGIE SHIELDSPRAY

ET POUR ÉVIER DE BAR

OU D’ÎLOT

1/8" (3.17mm)

92590

To access additonal technical documents & product info, visit www.deltafaucet.com/p/Your-Model-Number-Here

(example: www.deltafaucet.com/p/9159T-DST)

Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.deltafaucet.

com/p/Your-Model-Number-Here (ejemplo: www.deltafaucet.com/p/9159T-DST)

Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.delta-

faucet.com/p/Votre-numéro-de-modèle-ci (exemple : www.deltafaucet.com/p/9159T-DST)

www.deltafaucet.com

1-800-345-DELTA (3358)

customerservice@deltafaucet.com

9181-DST

9192-DST

9178-DST 9678-DST

9981-DST

9992-DST

Congratulations, Your faucet has a new feature. Delta

ShieldSpray™ Technology cuts through stubborn messes with a concentrated stream and

contains the splatter with an innovative water shield. Now you can power off the mess without making a bigger one.

Felicitaciones, su grifo tiene una nueva característica. La tecnología de Delta® ShieldSpray™ corta los sucios persistentes con un chorro intenso y

contiene la salpicadura con un protector de agua innovador. Ahora usted tiene la potencia de limpieza sin ensuciar más.

Félicitations! Votre robinet a une nouvelle caractéristique. La technologie ShieldSprayMC de Delta® utilise un jet concentré qui déloge la saleté

incrustée et un écran d’eau innovateur qui empêche les éclaboussures. Vous pouvez maintenant déloger la saleté sans tout salir dans les environs.

Summary of content (16 pages)

PAGE 1
92590 HIGH-RISE PULL-DOWN KITCHEN WITH SHIELDSPRAY™ AND BAR / PREP FAUCETS LLAVES DE AGUA-GRIFOS PARA BAR/PREPARATIVOS CUELLO DE GANSO EXTRAÍBLES CON SHIELDSPRAY™ Models/Modelos/Modèles Leland®, Esque™ & Addison™ Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
1 9192-DST & 9992-DST 3 9178-DST & 9678-DST 5 5 3 3 3 4 8 2 4 8 3 2 2 1 6 1 6 7 7 9 9 Models 9992-DST, 9192-DST, 9178-DST & 9678-DST Place gasket (1) into groove on bottom of base ring (2). Place base ring onto sink over mounting hole, then install trim ring (3) over base ring. Tabs (4) on trim ring and base ring should be aligned together at the front and rear of the installation hole. Insert faucet lines and shank through mounting hole, then install hub (5) onto trim ring.
PAGE 3
Optional / Opcional / Facultative 9181-DST & 9981-DST 2 4 1 3 5 3 2 1 3 3 4 2 5 3 6 6 5 7 Model 9181-DST & 9981-DST Optional Escutcheon Installation Place gasket (1) into groove on bottom of faucet (2). Insert faucet tubes and mounting shank (3) through mounting hole. Install mounting bracket (4) and nut (5) onto the mounting shank using wrench (6). Not included with all models - To order see replacement parts page for your model.
PAGE 4
2 A. B. OR 5 3 4 OU 2 5 1 2 2 4 1 4 A. Water Line Connections Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (5) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (2) on faucet tube to supply valve connection (4) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN. Repeat for other tube.
PAGE 5
2 Custom Fit Connections Conexiones Especiales Spéciaux Branchement Incorrect Installation Instalación Incorrecta Installation Incorrecte Correct method Método Correcto Bonne méthode 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3.
PAGE 6
3 C. B. A. 2 2 1 1 3 Flush Supply Lines B. Then, while holding the outlet tube (1) over the C. Move faucet handle (2) to the off position, and A. Coloque un cubo o balde debajo del accesorio de B. Luego, mientras que sostiene el tubo de salida (1) C. Mueva la manija de la llave (2) a la posición Rincez les tuyaux d’alimentation A. Placez un seau sous le raccord de sortie (1) et B. Ensuite, tenez le tube de sortie (1) au-dessus C. Déplacez la manette (2) en position d’arrêt, A.
PAGE 7
4 A. B. 5 A. 2 2 3 1 4 1 1 A. Turn on water supplies (1) and faucet valve handle (2). Check all connections at arrows for leaks. Refer back to the appropriate installation instructions and retighten if necessary. If assembled correctly, check for damage to seals and order appropriate replacements. Hose Installation A. Insert hose end (1) through hose weight assembly (2). B. Push hose end (1) onto faucet outlet (3). Attach clip (4) over hose and outlet as shown.
PAGE 8
6 B. 3 Function Wand Mango de 3 Funciones Poignée à 3 Fonctions A. A 1 1 2 90º A 3 B. WIth the wand undocked, press button 1 to use the Shieldspray mode. A. Sprayer will lock into position when brought into proximity of the spout magnet. The sprayer can be removed by either pulling directly out from the spout or by twisting 90° in either direction which will cause the magnets to repel and the head to decouple from the spout (recommended). Hold the plate 1/2 way through the bubble.
PAGE 9
7 1 2 Setting The Handle Limit Stop (Optional) This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory. Position 2, to the right, allows half of the normal handle motion (“all cold” to “mixed hot/cold”). The handle limit stop can be adjusted by the homeowner once the faucet is installed.
PAGE 10
Press Button Pulsar botón Pressez le bouton 4 5 6 3 7 1 2 Maintenance Mantenimiento If faucet leaks from spout outlet–SHUT OFF WATER SUPPLIES. Replace valve cartridge (7). When reinstalling parts, make sure bonnet nut (6) is tightened securely with a wrench.* * WARNING: Failure to securely tighten bonnet nut with a wrench could result in water damage. Note: A small amount of water may run out the spout or drip for a very short period after the faucet is shut off.
PAGE 11
Models / Modelos / Modèles 9178-DST & 9678-DST 9178-DST 9678-DST RP51502p Cap Casquete Embase RP60923 Friction Spacer Arandela de Fricción Rondelle de frottement RP51480p Sprayer & Hose Assembly (Includes aerator) Rociador y Ensamble d la Manguera (Incluye el aireador) Douchette et Tuyau Souple (Inclut aérateur) RP49149 Steel Weight Assembly Ensamble de la Pesa de Acero Masselotte en acier RP63195p Lever Handle Manijas de Palanca Manette RP40650 Set Screw Tornillo de Presión Vis de calage RP80977 W
PAGE 12
Models / Modelos / Modèles 9192-DST & 9992-DST 9192-DST RP37036 Set Screw Tornillo de Presión Vis de calage RP54234p Button Botón Bouton 9992-DST RP62875 Friction Spacer Arandela de Fricción Rondelle de frottement RP80977 Wand Retainer & Replacement Kit Soporte para el mango y piezas de repuesto Trousse de rechange et pièce de retenue de douchette RP51503 Bonnet Bonete Chapeau RP60976p Sprayer & Hose Assembly (Includes aerator) Rociador y Ensamble de la Manguera (Incluye el aireador) Douchette et Tuya
PAGE 13
Models / Modelos / Modèles 9181-DST & 9981-DST 9181-DST RP47271p Button & Set Screw Botón y Tornillo de Presión Bouton et Vis de calage RP83820p Lever Handle, Button & Set Screw Manijas de Palanca, Botón y Tornillo de Presión Manette, Bouton et Vis de calage 9981-DST RP80977 Wand Retainer & Replacement Kit Soporte para el mango y piezas de repuesto Trousse de rechange et pièce de retenue de douchette RP60923 Retainer Fun da Douille RP83819p Sprayer Assembly Ensamble de Rociador Pulvérisateur RP51502
PAGE 14
Limited Warranty on Delta® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Delta® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 15
Notes/Notas 15 92590 Rev.
PAGE 16
92590 Rev.