User Guide

ManualsBrandsDELTA FAUCET ManualsFaucet PartsDelta T2794-RB Linden Roman Tub Trim, Venetian Bronze {Rough-In Valve Sold Separately}

T2794

1/22/16 Rev. C

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

SILICONE

Icons

1/8" (3.17mm)

3/32" (2.38mm)

Models/Modelos/Modéles

T2794 & T4794

Series/Series/Seria

Linden™

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS PARA BAÑERA

ROMANA DE DOS MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE ROBINET À

DEUX POIGNÉES POUR BAIN ROMAIN

T4794

86648

www.deltafaucet.com

1/8" (3.17mm)

3/32”

(2.38mm)

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and

maintenance information.

• To complete the deck and valve rough-in prior to

installing this trim kit.

Para instalación fácil de su llave Delta usted

necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e información

de mantenimiento.

• Para completar el borde y la instalación de válvulas

dentro de las paredes previa a la instalación de la

llave y sus accesorios.

Pour installer votre robinet Delta facilement,

vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes les

instructions de nettoyage et d’entretien;

• Installez le corps du robinet et terminez le pourtour

du bain avant de poser les accessories de finition.

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 86648 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN Models/Modelos/Modéles T2794 & T4794 Series/Series/Seria Linden™ Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. T2794 T4794 E You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: SI LI C O N TE F LON 1/8" (3.17mm) 3/32" (2.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
Model / Modelo / Modèle T2794 RP70636▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP52139▲ Set Screw Tornillo de Ajuste Vis de Calage RP52593 Stream Straightener, Gasket & Wrench Enderezador del Chorro, Empaque y Llave Concentrateur de Jet, Joint et Clé RP70635▲ Handle Assembly Ensamble de la Manija Manette RP52596 Gasket Empaque Joint RP70637▲ Handle Base, Nut & Gasket Base de la Manija, Tuerca y Empaque Bae, écrou et joint de manette ▲Specify Finish ▲Especifíque el Acabad
PAGE 4
A. B. T4794 1 2 3 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 2 1 3 Maintenance B. Model T4794 If faucet does not divert water from the spout to the hand shower, check that the lift rod (1) is securely threaded into the diverter (2). If the problem persists remove the lift rod and spout. Replace the diverter assembly RP40668. A. If faucet leaks from spout outlet: Shut off water supplies – Replace Seats and Springs (1) - RP4993.
PAGE 5
1 T2794 2 T2794 5 7 1 3 1 4 1 2 6 3 T4794 T4794 5 1 7 2 3/32" (2.38 mm) 3/32 po 3 1 4 1 2 6 3 Screw bases (1) with gaskets (2) over end valves (3). Option: Use silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on the deck. Install set screw (7) and tighten to secure the spout. NOTE: The deck and valve rough-in must be finished before installing the trim kit.
PAGE 6
3 C. T4794 A. T4794 1 2 1 4 3 B. T4794 D. T4794 1 1 2 For Models T4794 Only C. Slide hose (1) through conical nut (2). Attach hose (1) to braided A. Install lift rod (1). Screw the lift rod until it drops down and metal hose (3) using gasket (4) and tighten. DO NOT install hand piece yet. rotates freely. B. Remove and discard the test cap and gasket (1). NOTE: This is an extra gasket, one is supplied with the hose. D. Install base (1) to nest (2) and tighten.
PAGE 7
5 4 T2794 1 1 T4794 2 1 1 2 Models T2794 Turn faucet handles (1) all the way on. Turn on hot and cold water supplies and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Install handles. Be sure glide ring (1) is properly seated in bottom of handle before installing. If either handle does not rotate in the correct direction, do the following: 1.
PAGE 8
6 B. T4794 A. T4794 2 1 3 1 2 For Models T4794 Only A. Pull hose (1) to its farthest extension and point it down into the B. Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. connection. Refer to maintenance section (page 4) for correct diverter and lift rod function. Sólo para los Modelo T4794 B.