User Manual

Wireless PCI Adapter
2
Connect the PCI Adapter to Your
Desktop PC
Hardware Installation
 Shut down your desktop PC.
 With the PC Card’s 68-pin connector facing the PCI Adapter’s
slot and the “Network PC Card” label facing up, slide the PC
Card completely into the PCI Adapter.
 Open your PC case and locate an available PCI slot in the
motherboard.
 Slide the PCI Adapter into the PCI slot. Make sure that all of its
pins are touching the slot’s contacts. You may have to apply a
bit of pressure to slide the card all the way in. After the card is
firmly in place, secure its fastening tab to your PC’s chassis
with a mounting screw. Then, close your PC.
 Power on your desktop PC.
 Insert the driver CD into your CD drive.
 The Hardware Installation is complete.
Wireless PCI Adapter
3
Driver Installation
Install Driver Under Windows 98
1. Windows 98 will automatically recognize a new PCI Network
Controller device. Click the Next button to proceed.
2. Windows will notify you that it is unable to locate the driver and
will ask you to specify where the driver is located. Click the
Other Location button to select the driver’s location.