User Manual

Wireless PC Card
22
15. After setting the Resource and Properties fields, Windows NT
will begin installing the network components you previously
selected. You may be asked if you would like to configure the
protocols with a DHCP server on your network. If this screen
comes up, check with your Network Administrator before
clicking the Yes or No button to continue.
16. Windows will bring you to the Microsoft TCP/IP Properties
screen. Setting the fields on this screen and then click the OK
button.
Wireless PC Card
23
17. Now, the network components will finish installing. You may
then see a screen similar to that shown here asking you if you’d
like to disable any network bindings. Be sure to check with your
network administrator before making ANY changes and then
click the Next button to continue.
18. At this point, Windows NT will let you know that it is ready to
start the network. If you’d like to stop the procedure, click the
Back button. To continue, click the Next button.