User's Manual

VCB-5003L6-W User Manual
3
1. Product Overview
1.1. General Description
The VCB-5003L6-W is a data collector module which can collect data from other devices
via TTL UART serial port and then send out data via WIFI or LTE. This device is built in
Realtek RT8195AM which is a highly integrated single-chip low power 802.11n Wireless
LAN network controller. The RTL8195AM combines an ARM-Cortex M3 MCU, WLAN MAC,
a 1T1R capable WLAN baseband, and RF in a single chip. It provides useful high speed
connectivity interfaces, such as USB2.0 host, USB2.0 device, and SDIO interfaces. It also
provides a bunch of configurable GPIOs which are configured as digital peripherals for
different applications and control usage.
The LTE function is based on Quectel BG96 module. BG96 is an embedded IoT (LTE Cat
M1, LTE Cat NB1 and EGPRS) wireless communication module. It provides data
connectivity on LTE-TDD/LTE-FDD/GPRS/EGPRS networks, and supports half-duplex
operation in LTE networks to meet customers’ specific application demands.
1.2. Features
 802.11b/g/n compatible WLAN up to 150 Mbps data rate
 LTE Cat M1
 TTL UART interface
 One 12-pin header connector
Standard
IEEE 802.11b/g/n
Data Rate
54, 48, 36, 24, 18, 12, 9, 6
20 MHz BW: ~72.2M
40 MHz BW: ~150M
Modulation
DSSS with DBPSK and DQPSK, CCK modulations with long and short
preamble.
OFDM with BPSK, QPSK, 16QAM, and 64QAM modulations, QPSK,
16QAM, 64QAM and 256QAM modulations.
Operating Frequencies
2.4GHz(WIFI)
Antenna Connector
SMA male for WIFI, SMA female for LTE