Datasheet

DELTA PLUS GROUP - ZAC La Peyrolière - BP 140 - 84405 Apt cedex FRANCE- Tel :[phone] - Fax :[phone]
E.mail :[e-mail] - Web : www.deltaplus.eu
4
Certifications and Standards
.
EN420:2003+A1:2009 General requirements
5: Dexterity (from 1 to 5)
EN388:2016
3: Resistance to abrasion (from 1 to 4)
1: Resistance to cutting (from 1 to 5)
2: Resistance to tear (from 1 to 4)
1: Resistance to puncture (1 to 4)
X: Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F)
EN ISO 374-1:2016 Protective gloves against dangerous chemicals and micro- organisms -
Part 1: Terminology and performance requirements for chemical risks.
TYPE B: Type B - Water and air tightness according to EN374-2:2014. Permeation
resistance to at least 3 chemicals at level 2 according to EN16523-1: 2015 (from 1
to 6).
KLMP: Resistant gloves to permeation by chemicals, tested according to EN374-3
EN374-2 :2014 Protective gloves against chemicals and micro-organisms - Part 2:
Determination of resistance to penetration. Water and air tightness.
EN16523-1:2015 Protective gloves against chemicals and micro-organisms - Part 1:
Determination of material resistance to permeation by liquid chemical (1 to 6).
KLMP: Resistant gloves to permeation by chemicals, tested according to EN374-3
K 6 > 480 mn: Caustic soda 40% (K) CAS 1310-73-2
L 4 > 120 mn: Sulphuric acid 96 % (L ) CAS 7664-93-9
M 2 > 30 mn: Nitric acid 65% (M) CAS 7664-93-9
P 6 > 480 mn: Hydrogen peroxide 30% (P) 7722-84-1
EN374-4 :2013 Protective gloves against chemicals and micro-organisms - Part 4:
Determination of resistance to degradation by chemicals