User manual

3U Servo Amplifier
APPENDIX A
PWM Cable Ordering Information
Length
Cable
600mm
(24")
900mm
(36")
1.5m
(60")
1.8m
(72")
2.1m
(84")
3.6m
(144")
Part Numbers
CABPWM-1
√
200-602739-024X
CABPWM-2
√
200-602739-036x
CABPWM-3
√
200-602739-060x
CABPWM-4
√
200-602739-072x
CABPWM-5
√
200-602739-084x
CABPWM-6
√
200-602739-144x
Mating Connector and Cable Kits
Cable sets can be purchased directly from Delta Tau to make the wiring of the system easier. Available
cable kits (CABKITxx) are listed below.
However, for those who wish to manufacture their own cable sets, the table below provides Connector
Kits to use with each drive. Connector Kits (CONKITxx) include the MOLEX connectors and pins for
the motor outputs, and 24VDC power supply connector.
Cable kits have terminated cables on the drive end and flying leads on the other.
CONKIT3C Mating Connector Kit for the 3U042 drives: Includes Molex Connector kit for
two motors, and 24V power connection for the backplane.
Requires Molex Crimp Tool for proper installation.
Molex Tool Part # 63811-0400 for the Motor Output
CABKIT3C Includes Molex mating connectors pre-crimped for dual axis drives up to 5-
amp continuous rated For 3U042
(1) 3 ft. 24VDC Power Cable
(2) 10 ft. shielded Motor Cable
Connector and pins Part numbers
CONKIT3C
Connector D/T part number D/T part number
individuals
Molex part number
Motor (x2)
3pins
200-000F03-HSG
Housing: 014-000F03-HSG
Pins: 014-043375-001
44441-2003
43375-0001
24V
2pins
200-C30F02-LHM
Housing: 014-C30F02-LHM
Pins: 025-701030-MCT
10-01-3026
08-70-1030
Appendix B 42