Reference Manual

PMAC 2 Software Reference
PMAC On-Line Command Specification 225
EAVERSION
Function
Report full specification of firmware version
Scope
Global
Syntax
EAVERSION
EAVER
Remarks
This command causes PMAC to report the full version of the firmware version that it is
using. It always returns an 8-digit response, with the following meanings to the digits.
Digit # Meaning Settings
1 PMAC Type 0 = PMAC(1)
1 = PMAC2
2 = Ultralite PMAC
3 = PMAC2-VME
4 = Ultralite PMAC2-VME
2 Memory backup type 0 = Battery backup
1 = AMD-style flash backup
2 = Intel-style flash backup
3 Options 0 = Standard
1 = ESA
2 = Lookahead
3 = ESA + Lookahead
4 Test version 0 = Released
1 = 1
st
test version
2 = 2
nd
test version, etc.
5 Revision suffix 0 = First released version of
revision number
1 = A version
2 = B version, etc.
6 – 8 Released version
number
3-digit representation without
decimal point (e.g. 116 for 1.16)
Example
EAVERSION
01007116 ; PMAC(1), AMD-flash backup,
; Standard firmware, released,
; G revision of 1.16
EAVER
41138116 ; Ultralite PMAC2-VME, AMD-flash,
; ESA firmware, 3
rd
test version,
; H revision of 1.16
See Also
On-line commands DATE, TYPE, VERSION
ENABLE PLC
Function
Enable specified PLC program(s).
Scope
Global
Syntax
ENABLE PLC {constant}[,{constant}...]
ENA PLC {constant}[,{constant}...]
ENABLE PLC {constant}[..{constant}]
ENA PLC {constant}[..{constant}]
where:
• {constant} is an integer from 0 to 31, representing the program number