User's Manual

Turbo PMAC2 Eth Ultralite Manual
SOFTWARE SETUP
24
After selecting the communication port with the controller, click OK.
The selected device is now added to the list, and is referred to as PMAC ##. You can have up to
32 PMAC devices defined on the software.
To check the communications, click the Test button. If communication is successful, you will
see a confirmation message.
In the case of Ethernet Communication, the Pcommserver will report the result of the PING
command to the network driver chip on the controller before trying to communicate to the
controller CPU.
Once communication is established, you can use any of the windows and tools provided by the
Pewin32PRO2 software and accompanied tools.