Specification Sheet

ManualsBrandsDelta ManualsShower FaucetsDelta 1.5 GPM Teck Wall Mounted Shower Head - Limited Lifetime Warranty

Delta reserves the right (1) to make changes in speciﬁcations and materials, and (2) to change or discontinue models, both without notice or obligation.

Dimensions are for reference only. See current full-line price book or www.specselect.com for ﬁnish options and product availability.

Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.

DSP– SHWB Rev. J Page 2.C.1

SPECIFICATION: (EXAMPLE)

Cast brass institutional wallmounted shower head, polished chrome-plated

finish, 30º spray angle from wall, concealed cast brass mounting plate,

vandal resistant front mounting screws, 1/2" copper sweat inlet.

Note: Not to be used as an anti-ligature device.

o 061125A

• Shower MAX flow: 2.5 gpm @ 80 psi

(9.48 L/min @ 552 kPa)

• Shower MIN flow: 2.5 gpm @ 45 psi

(9.48 L/min @ 310 kPa)

• See Note 1

o 060793A

• Shower MAX flow: 2.0 gpm @ 80 psi

(7.57 L/min @ 552 kPa)

• Shower MIN flow: 1.53 gpm @ 45 psi

(5.79 L/min @ 310 kPa)

• See Note 1

o 060991A

• Shower MAX flow: 1.75 gpm @ 80 psi

(6.62 L/min @ 552 kPa)

• Shower MIN flow: 1.55 gpm @ 45 psi

(5.87 L/min @ 310 kPa)

• See Note 1

o 061011A

• Shower MAX flow: 1.5 gpm @ 80 psi

(5.68 L/min @ 552 kPa)

• Shower MIN flow: 1.38 gpm @ 45 psi

(5.22 L/min @ 310 kPa)

• See Note 1

SPECIFICATION: (EXAMPLE)

Forged brass 30º vandal-resistant wallmount shower head.

Note: Not to be used as an anti-ligature device.

o 063196A

• Shower MAX flow: 1.5 gpm @ 80 psi

(5.68 L/min @ 552 kPa)

• Shower MIN flow: 1.36 gpm @ 45 psi

(5.15 L/min @ 310 kPa)

• See Note 1

o 063214A

• Shower MAX flow: 2.0 gpm @ 80 psi

(7.57 L/min @ 552 kPa)

• Shower MIN flow: 1.9 gpm @ 45 psi

(7.19 L/min @ 310 kPa)

• See Note 1

o RP43381

3-Function Touch-Clean

, chrome-plated

finish, brass ball shower head.

• Shower MAX flow: 1.75 gpm @ 80 psi

(6.6 L/min @ 552 kPa)

• Shower MIN flow: 1.5 gpm @ 45 psi

(5.7 L/min @ 310 kPa)

o 061365A

RP43381 with 060710A arm and flange

• See Note 1

o RP38357

Touch-Clean

, polished chrome-plated

finish, brass ball shower head.

• Shower MAX flow: 1.75 gpm @ 80 psi

(6.6 L/min @ 552 kPa)

• Shower MIN flow: 1.5 gpm @ 45 psi

(5.7 L/min @ 310 kPa)

o 061367A

RP38357 with 060710A arm and flange

• See Note 1

o 52672-15-BG

Chrome-plated brass ball shower head

• Shower MAX flow: 1.5 gpm @ 80 psi

(5.7 L/min @ 552 kPa)

• Shower MIN flow: 1.34 gpm @ 45 psi

(5.07 L/min @ 310 kPa)

o 061366A

52672-15-BG with 060710A arm

and flange

• See Note 1

o RP46384

Okinetic Technology

shower head.

• Shower MAX flow: 1.5 gpm @ 80 psi

(5.68 L/min @ 552 kPa)

• Shower MIN flow: 1.48 gpm @ 45 psi

(5.6 L/min @ 310 kPa)

o 061368A

RP46384 with 060710A arm

and flange

• See Note 1

Note 1

Shower heads/hand showers are for use with automatic compensating

valves rated at or less than the Shower MIN flow rate value.

Shower Accessories

TECK

COMMERCIAL

DSP– SHWB Rev. L

Summary of content (3 pages)

PAGE 1
TECK ® Shower Accessories SPECIFICATION: (EXAMPLE) Cast brass institutional wallmounted shower head, polished chrome-plated finish, 30º spray angle from wall, concealed cast brass mounting plate, vandal resistant front mounting screws, 1/2" copper sweat inlet. Note: Not to be used as an anti-ligature device. o 061125A •S hower MAX flow: 2.5 gpm @ 80 psi (9.48 L/min @ 552 kPa) • Shower MIN flow: 2.5 gpm @ 45 psi (9.48 L/min @ 310 kPa) • See Note 1 o 060793A •S hower MAX flow: 2.0 gpm @ 80 psi (7.
PAGE 2
TECK ® Shower Accessories COMMERCIAL 060793A, 060991A, 061011A & 061125A Shower head ANCHOR PLATE 73mm (2.87") 1/2" Copper Connection 102mm (4") 73mm (2.87") 44mm (1.75") 46mm (1.8") 76mm (3") (3) - 7mm (.28") Dia. Holes for Mounting 30° 063196A & 063214A Shower head 63.5 mm (Ø 2.5") 76 mm (2.96") 55 mm (2.17") 75 mm (2.96") 30º Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 2.C.2 Rev. L DSP–SHWB Rev.
PAGE 3
TECK ® Shower Accessories COMMERCIAL SPECIFICATION: (EXAMPLE) Hand shower head with push button pause. Back flow protection provided by two integral certified check valves in series, which operate independently and are non-serviceable, ASME A112.18.3 and ASME A112.18.1 / CSA B125.1. ® o 59462-WHB-PK •S hower MAX flow 2.5 gpm @ 80 psi (9.48 L/min @ 552 kPa) • Shower MIN flow 1.7 gpm @ 45 psi (6.44 L/min @ 310 kPa) • See Notes 1 & 2 o 59462-WHB18-PK •S hower MAX flow 1.75 gpm @ 80 psi (6.