Installation Guide

ManualsBrandsDelta ManualsKitchen Faucets11926-SS-DST

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave Delta

usted necesitará:

LEER TODAS



LEER TODOS



For easy installation of your Delta

faucet you will need:

READ ALL



READ ALL



Pour installer votre robinet Delta

facilement, vous devez:

LIRE TOUTES

LIRE TOUS











SILICONE















WARNING: THIS FAUCET IS NOT TO BE USED WITH PORTABLE

DISHWASHERS!ADVERTENCIA: 

AVERTISSEMENT: 



 





SILICONE





60961

SINGLE HANDLE KITCHEN FAUCET

LLAVE DE COCINA DE PALANCA

ROBINET DE CUISINE À UNE MANETTE

Summary of content (12 pages)

PAGE 1
SINGLE HANDLE KITCHEN FAUCET 60961 LLAVE DE COCINA DE PALANCA ROBINET DE CUISINE À UNE MANETTE ASME A112.18.1 / CSA B125.
PAGE 2
Limited Warranty on Delta® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Delta® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 3
1 B. A. C. A. 1 2 1 B. 1 6 3 2 2 2 6 3 3 1 1 1 4 4 5 5 Faucet Installation Faucet Installation CENTER MOUNT STYLE DECK MOUNT STYLE A. Place baseplate shanks (1) through mounting holes in deck. Option: If sink is uneven, use silicone sealant under the baseplate. B. Place escutcheon (1) over baseplate. Insert faucet (2) down into escutcheon assembly. C. Thread mounting nut and washer (1) onto mounting shank (2).
PAGE 4
2 B. A. B-2 B-1 3 2 1 1 2 4 3 3353-DST 4 B-3 1 2 1 For Models With A Side Spray Note: If you prefer not to use side sprayer, skip this step and move to page 5. A. Mount spray support assembly (1) in far right hole in sink. HAND TIGHTEN ONLY. Insert spray hose (2) down through spray support. B. Pull diverter clip (1) outward until loose; but, do not completely remove. Remove diverter cap (2) from diverter (3) and discard if installing a side spray.
PAGE 5
3 B. A. 2 OR 2 1 O 2 OU 3 1 3 4 1 2 4 Water Line Connections A. Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (2) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (3) on faucet tube to supply valve connection (4) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN. Repeat for other tube.
PAGE 6
Correct method Método Correcto Bonne méthode Incorrect Installation Instalación Incorrecta Installation Incorrecte 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3. Insert tube into outlet fitting (4).
PAGE 7
4 A. B. 3 1 2 4 FLUSH YOUR SYSTEM: aerator (1) using supplied wrench (2) and turn faucet A. Remove handle (3) to the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Reinstall aerator. all connections at arrows for leaks. Re-tighten if necessary, but B. Check do not overtighten.
PAGE 8
5 1 2 Setting The Handle Limit Stop (Optional) This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory. Position 2, to the right, allows half of the normal handle motion (“all cold” to “mixed hot/cold”). The handle limit stop can be adjusted by the homeowner once the faucet is installed.
PAGE 9
1/8" 4 5 3 1 2 6 Maintenance If faucet exhibits very low flow: A. Remove and clean Aerator (1) with supplied wrench (2), or B. SHUT OFF WATER SUPPLIES. Replace valve cartridge (3). When reinstalling parts, make sure bonnet nut (5) is tightened securely with a wrench.* If spray attachment does not function properly: Replace diverter and hose assembly (6). If faucet leaks from under handle: Remove handle and unthread trim cap (4). Using a wrench, ensure bonnet nut (5) is tight.
PAGE 10
RP60965▲ Lever Handle Assembly Manijas de Palanca Manette 1353-DST, 3353-DST & 4453-DST Models / Modelos / Modèles RP40650 Set Screw Tornillo de Presión Vis de calage RP60966▲ Button / Botón / Bouton RP51502▲ Cap Casquillo Embase RP51503 Bonnet & V-Ring Bonete y Aro-V Chapeau et Joint à lèvres ▲Specify Finish ▲Especifíque el Acabado ▲Précisez le Fini RP50587 Valve Assembly Ensamble de la válvula Soupape RP54977 Aerator Aireador Aérateur RP50787▲ Support Assembly Ensamble del Soporte Support RP10345 O
PAGE 11
RP60932▲ Lever Handle Assembly Manijas de Palanca Manette 11926-DST Models / Modelos / Modèles RP37036 Set Screw Tornillo de Presión Vis de calage RP53879▲ Button / Botón / Bouton RP51502▲ Cap Casquillo Embase RP51503 Bonnet & V-Ring Bonete y Aro-V Chapeau et Joint à lèvres RP50587 Valve Assembly Ensamble de la válvula Soupape RP53880▲ Spray, Diverter & Hose Assembly Rociador, Desviador y Manguera Douchette, Dérivation et Tuyau Souple RP50787▲ Support Assembly Ensamble del Soporte Support RP64078 2.
PAGE 12
Notes / Notas / Notes 12 60961 Rev.