Specification

Dryden
™
MATERIALS: Posts - Zinc Die Cast
Roller - Zinc Die Cast
Wall Plates - Zinc Die Cast
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is
not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted pivoting toilet paper holder shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
PIVOTING TOILET PAPER HOLDER
TECHNICAL DATA
Dryden
™
MATERIALS: Post - Zinc Die Cast
Ring - Zinc Die Cast
Wall Plate - Zinc Die Cast
INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied
fasteners. Slip product over wall plate(s) and tighten set screws until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel ring shall be model__________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
TOWEL RING
[215.9mm]
8-1/2"
[171.5mm]
6-3/4"
[79.4mm]
3-1/8"
[19.0mm]
3/4"
[44.5mm]
1-3/4"
[79.4mm]
3-1/8"
[44.5mm]
1-3/4"
[152.4mm]
6"
[196.8mm]
7-3/4"
[88.9mm]
3-1/2"
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com ©2009 LHMC, A Masco Company