Installation Guide

13 / 14 Series Installation
5
Trim Installation
C.
D.
A.
B.
• Slide O-ring (1) over cartridge and
the bonnet nut (2). The O-ring, which
acts as a spacer to steady the sleeve,
should rest behind the bonnet nut.
IF YOUR MODEL REQUIRES A
SPACER (1):
• Insert it into the sleeve (2) and push it
to the front.
• Slide the sleeve over the cartridge,
body and O-ring.
• Secure the escutcheon (1) and backplate
(2) (if your model has one) to the bracket
(3) using the 2 screws provided (4).
• Do not overtighten escutcheon screws.
• Using an Allen wrench to secure the set
screw, install the handle onto the stem.
1
2
1
2
1
1
2
3
4
1072264 Rev. H