Specification Sheet

Electronic Faucets
Deckmount Electronic Gooseneck Faucet
Model No: 1500T3310-BB-R7
SPECIFICATION:
•
Supplied as complete product only
•
H2Optics® technology no external adjustments required
•
Chrome plated one piece cast main body with integral sensor
•
Adjustable sensing range and timeout
•
Forged brass solenoid valve
•
Surface mount housing
•
Mixing valve required (order separately)
•
Serviceable filter screen upstream of the valve
•
Deckmount Electronic Gooseneck Faucet
•
Spout: R7 - Smooth End Gooseneck - 9.0" spout reach - 12.7" height
(unmounted) - Standard rigid installation - Vandal resistant .090" wall
thickness (R7SE)
•
Outlet#: 1 - Smooth End, Laminar Flow Control in Base of Gooseneck
Spout 2.2 USGPM (8.3 L/min)
•
Plastic SURFACE Mount Housing
•
REQUIRES SINGLE TEMPERED WATER SUPPLY
•
(24 VAC) Hardwire powered by Class II transformer (purchased separately)
•
Single Hole Deckmount FIXED Gooseneck Spout (R5) with Integral Sensor
in Base
•
Hardwire Converter with Batttery Back-up (-BB) comes complete with
Watertight Connector and 9V battery
COMPLIES WITH:
•
CSA certified
•
Complies to ASME A112.18.1/CSA B125.1
•
Indicates compliance to ICC / ANSI A117.1
•
Verified compliant with 0.25% weighted average Pb content regulations
•
Patented
•
NOTE 1: For optimum performance of this product,we recommend a
system pressure between 20 and 80 PSI static. This product will operate up
to a maximum of 125 PSI static per ANSI and CSA requirements. However,
we do not recommend pressures above 80 PSI. Thermal expansion or
leaking pressure reducing valves may require use of expansion tanks or
relief valves to ensure your system never exceeds its maximum intended
pressure setting.
•
NOTE 2: Designed for routine 171°F (77°C) disinfection cycles up to 30
minutes
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Hands free (touchless) operation.
•
Water flows when sensor is activated.
•
Water flow stops upon de-activiation of sensor.
•
Adjustable auto shut-off feature. Factory set to 45 seconds. Will reset once
obstruction is removed.
•
Adjustable sensing distance 76 to 381mm (3" to 15") factory set to 229mm
(9") (±3.0")
•
Periodic Rinse feature, time adjustable in 6 hour increments up to 2
days.Selectable rinsing lengths from 10 to 180 seconds. Factory set off.
OPERATION:
NOTES:
Control Box(1500Txxx0) - Supplied as COMPLETE PRODUCT ONLY
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced December 13, 2016.
- 1.0.20700
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]