Exploded Parts

ManualsBrandsDelta ManualsCommercial ProductsDelta Commercial Bathroom Faucet Electronic

Page 1

206255 Rev. A

150__T3 __ __ __

Write purchase model number here for future reference

PLEASE LEAVE this M&I Sheet with the owner, maintenance plumber, etc. as

items relating to ongoing maintenance suggestions and procedures are included.

*Package Quantities May Change.

Check the Parts section of the latest Delta Commercial Faucet Price List for current quantities.

OPTION LIST

060637A

VR laminar outlet with

Antimicrobial by Agion

060639A

VR Flow Control Aerator

& Wrench

060564A

Single Hole Deck

Gasket (6/pkg)

RP6087

Nut & Washer

TRANSFORMERS

060704A

Transformer 110 to 24 VAC 20VA

up to 5 Electronic Valves

060771A

Transformer 110 to 24 VAC 40VA

up to 10 Electronic Valves

060772A

Transformer 110 to 24 VAC 100VA

up to 25 Electronic Valves

DECK PLATES

060548A

4” Deck Plate Gasket (6/pkg)

060546A

4” Deck Plate & Hold-Down Pkg

060549A

8” Deck Plate Gasket (6/pkg)

060547A

8” Deck Plate & Hold-Down Pkg

060681A

Battery Holder

060571A

Mounting Hardware

Note: See page 3 for parts breakdown

on recessed mount boxes.

RP6092

Deck Plate Nut & Washer

060546A

4” Deck Plate & Hold-Down Package

060547A

8” Deck Plate & Hold-Down Package

060564A

Single Hole Deck Gasket (6/pkg)

206255 206255 206255 206255 206255

NOTE: For optimum performance of this product, we recommend

a system pressure between 20 and 80 PSI static. This product

will operate up to a maximum of 125 PSI static per ANSI and

CSA requirements. However, we do not recommend pressure

above 80 PSI. Thermal expansion or leaking pressure reducing

valves may require use of expansion tanks or relief valves to

ensure your system never exceeds its maximum intended

pressure setting.

060905A

Cover Gasket

060906A

Surface

Mount Housing

060907A

Driver Board

060690A

36” Cable

Extension

RP30523

Braided Hose

060416A

Bypass Adaptor

060683A

24VAC to 6VDC

Converter

060910A

Solenoid Valve with 3/8”

Compression Connectors

060908A

Solenoid Holder

060909A

Screen Assembly

061056A

0.5 USGPM

(1.9 L/min)

062020A

1.5 USGPM

(5.7 L/min)

Adapter with Flow

Control for smooth

end spouts

060913A

3/8” Comp Connect Nut

and Ferrile

060976A (R3)

060978A (R4)

060903A (R5)

060980A (R7)

061008A (R35)

Single-Hole Mount

Assembly including

Sensor and Hold-Down

Package and Spout

with aerator thread

060977A (R3)

060979A (R4)

060904A (R5)

060981A (R7)

060982A (R35)

Single-Hole Mount

Assembly including

Sensor and Hold-Down

Package and Spout

(with smooth ends)

www.specselect.com

Summary of content (7 pages)

PAGE 1
50__T3 __ __ __ NOTE: For optimum performance of this product, we recommend a system pressure between 20 and 80 PSI static. This product will operate up to a maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressure above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting.
PAGE 2
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS FOR SURFACE MOUNT HOUSING: CONTROL BOX #0 STEP 1. FAUCET INSTALLATION Connect 20” braided hose to spout inlet. Clean deck/sink surface where faucet will be mounted. Mount faucet to sink using nut(s) and washer(s) provided.
PAGE 3
Installation should be in accordance with local plumbing and electrical codes. FLUSH ALL PIPES THOROUGHLY BEFORE INSTALLATION. INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1, 6, 8. STEP 1. ROUGH IN HARDWIRE Remove suitable knockout(s) in box(es) and insert cable bushing(s). See Fig. 6. Cable Bushing Note: Wires connecting between box(es) and from transformer must be protected from abrasion, and being pulled at connections.
PAGE 4
INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1, 6, 8. STEP 3. CONNECT WATER SUPPLY Typical Installation (Recessed Mount Box) Gooseneck Spout Install sink and connect drainage to rough in. See applicable Fig. 7, Fig. 8 or Fig. 9. Please note that the connection tube and fittings are supplied by the installer to connect the 3/8” MIP at the box outlet and compression joint for 3/8” O.D. Soft copper tube at the spout. Connect water supply through to spout.
PAGE 5
INSTALLATION AND SET UP INSTRUCTIONS FOR RECESS MOUNT HOUSING: CONTROL BOXES #1, 6, 8. Operation Illustration STEP 7. TEST FOR OPERATION Test for operation. If unit does not work properly, see Troubleshooting Guide on page 6. STEP 8. MAKING ADJUSTMENTS If adjustments are required. Note factory defaults for program shown in Quick Reference Chart. Otherwise, replace the driver board housing cover as the electronic product is ready for use.
PAGE 6
CARE INSTRUCTIONS This Delta Commercial faucet is designed and engineered in accordance with the highest quality and performance standards. With proper care, it will give years of trouble free service. Care should be given to the cleaning of this product. Although the chrome finish is extremely durable, it can be DAMAGED by ACIDIC CLEANERS (i.e. cleaners designed specifically for vitreous china lavatories and water closets), HARSH ABRASIVES or POLISH.
PAGE 7
Delta Commercial Faucet Limited Warranty All parts of the Delta® HDF® and TECK® faucets are warranted to the original consumer purchaser to be free from defects in material, finish and workmanship for a period of five (5) years unless otherwise specifically stated in the catalogue and price book. This warranty is made to the original consumer purchaser and shall be effective from date of purchase as shown on purchaser’s receipt.