Installation Guide

ManualsBrandsDelta ManualsBathroom Sink Faucets15766LF-SP

SILIC

ONE

Models/Modelos/Modèles

15766LF

Series/Series/Seria

SINGLE HANDLE LAVATORY

CENTERSET FAUCETS

LLAVES MONOCONTROL DE

MONTURA DE CENTRO PARA

LAVAMANOS

ROBINETS À ENTRAXE COURT À

UNE POIGNÉE POUR LA CUISINE

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

For easy installation of your Delta faucet

you will need:

・

READ ALL

the instructions completely before

beginning.

・

READ ALL

warnings, care and maintenance

information.

Para instalación fácil de su llave Delta

usted necesitará:

・

LEER TODAS

las instrucciones completamente

antes de empezar.

・

LEER TODAS

los avisos, cuidados, e información

de mantenimiento.

Pour installer votre robinet Delta

facilement, vous devez:

・

LIRE TOUTES

les instructions avant de débuter.

・

LIRE TOUE LES

les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien.

www.deltafaucet.com

03/21/2017 Rev. B

88883

Summary of content (6 pages)

PAGE 1
SINGLE HANDLE LAVATORY CENTERSET FAUCETS 88883 LLAVES MONOCONTROL DE MONTURA DE CENTRO PARA LAVAMANOS Models/Modelos/Modèles 15766LF Series/Series/Seria ROBINETS À ENTRAXE COURT À UNE POIGNÉE POUR LA CUISINE Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
1A 2 1 5 2 3 4 6 1B 1 5 2 3 4 6 Faucet Installation CONNECT TO WATER SUPPLIES. Position faucet (1) with single or three hole escutcheon (2) and gasket (3) on mounting surface. Option: If mounting surface is uneven, use silicone sealant under the gasket (3). Place mounting hardware (4) over mounting stud (5) under sink. Secure with mounting nut (6). Tighten mounting nut securely.
PAGE 3
A. B. 1 1 2 2 4 3 3 C. 4 D. 5 3 1 6 3 7 1 2 1 2 4 Install Pop-Up Assembly A. Remove stopper (1) and flange (2). Screw nut (3) all the way down. Push black gasket (4) down. B. Apply silicone to underside of flange (1). Insert body (2) into sink. Screw flange onto body. Pivot hole (3) must face back of sink. Tighten nut/gasket, clean excess silicone. C. Remove pivot nut (1). Install horizontal rod (2) and stopper (3) as removable (4) or non-removable (5).
PAGE 4
3 1 2 3 2 4 1 Maintenance FLUSH SYSTEM / CHECK FOR LEAKS Remove aerator (1) using supplied wrench (2) and turn faucet handle (3) all the way on. Slowly turn on hot and cold water supplies (4) and flush water lines for one minute. SHUT OFF WATER SUPPLIES If faucet leaks from under handle: Remove handle and ensure bonnet (1) is tight. Important: This flushes away any debris that could cause damage to internal parts. If leak persists: Replace cartridge (2).
PAGE 5
▲ Specify Finish Especifíque el acabado Précisez la Finition 2 RP84372▲ Lift Rod Barra de Alzar Tige de Manoeuvre RP92289 Valve Cartridgea & Adapter Válvula de Cartucho y Adaptador Cartouche de Soupape et Adapteur 1 RP91814▲ Handle & Set screw Manija y Tornillo de presión Poignée avec et Vis de calage RP52665 Bonnet Nut & Cap Bonete Tapón y Tapa Chapeau et Chapeau 3 RP84258-1.
PAGE 6
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.