Installation Guide

ManualsBrandsDelta ManualsBathHaywood Single Hole Single-Handle Bathroom Faucet with Metal Drain Assembly in Stainless

SILICONE

Icons

SINGLE HANDLE LAVATORY

CENTERSET FAUCETS

LLAVES MONOCONTROL DE MONTURA

DE CENTRO PARA LAVAMANOS

ROBINETS À ENTRAXE COURT À

UNE POIGNÉE

Models/Modelos/Modèles

505LF, 525LF-MPU

Series/Series/Seria

Para instalación fácil de su llave

Delta usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados e

información de mantenimiento.

• Comprar las conexiones correctas para el

suministro de agua.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care and maintenance

information.

• To purchase the correct water supply hook-up.

SILICONE

Icons

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

SILICONE

Icons

SILICONE

Icons

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant

de débuter;

• LIRE TOUS les avertissements ainsi que toutes

• Acheter le bon nécessaire de raccordement.

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

9/17/15 Rev. B

1/8"

(3.17mm)

77425

www.deltafaucet.com

Summary of content (8 pages)

PAGE 1
SINGLE HANDLE LAVATORY CENTERSET FAUCETS 77425 LLAVES MONOCONTROL DE MONTURA DE CENTRO PARA LAVAMANOS ROBINETS À ENTRAXE COURT À UNE POIGNÉE Models/Modelos/Modèles 505LF, 525LF-MPU Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. TEF LON SI LIC ON E You may need/Usted puede necesitar/ Articles dont vous pouvez avoir besoin: E ON LIC 1/8" (3.
PAGE 2
CLEANING AND CARE Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
RP5648▲ Stopper Tapón Bonde RP52834▲ Handle & Set Screw Manija y Tornillo de Ajuste Manette et Vis de Calage RP47666 Set Screw Tornillo de Ajuste Vis de Calage RP23060▲ Flange Reborde Collerette RP51502▲ Cap Casquillo Embase RP6142 Gasket Empaque Joint RP6140 Nut & Washer Tuerca y Arandela/ Roldana Écrou et Rondelle RP51503 Bonnet Bonete Chapeau RP12516 Strap & Screw Barra Chata y Tornillo Feuillard et Vis RP6132 Nut Tuerca Écrou RP12517 Horizontal Rod & Clip Barra Horizontal y Gancho Tige Horizonta
PAGE 4
5 3 1 2 Maintenance If faucet exhibits very low flow: A. Remove and clean Aerator (1) with supplied wrench (2), or B. SHUT OFF WATER SUPPLIES. Replace valve cartridge (3). When reinstalling parts, make sure bonnet nut (5) is tightened securely with a wrench.* If faucet leaks from under handle: Remove handle and unthread trim cap (4). Using a wrench, ensure bonnet nut (5) is tight. Mantenimiento Si la lave de agua exhibe muy poco flujo: A.
PAGE 5
1 2 A. 1 2 B. 1 1 1 1 3 Supply Line Connections A. Position faucet (1) and gasket (2) on sink. Option: If sink is Choose hook-ups for 1/2” I.P.S. connections: (1) Ball nose riser (3/8” O.D. copper tubing), or (2) 1/2” I.P.S. faucet connector. Use the enclosed coupling nuts (3) with the ball nose risers (1). Important: Use two wrenches when tightening. Do not overtighten. uneven, use silicone under the gasket. B. Secure with locknuts (1). Conexiones de las líneas de Suministro A.
PAGE 6
A. B. E. D. C. NE I CO 1 SIL 3 1 2 3 2 3 2 1 1 1 F. G. 4 2 2 H. 5 4 3 2 1 5 1 2 3 2 1 6 Step 3b Metal Pop-Up Installation A. Remove stopper (1) and flange (2). B. Screw nut (1) all the way down. Push washer (2) and gasket (3) down. C. Remove tailpiece (1) from body (2), add plumber tape (3), replace tailpiece. G. Remove pivot nut (1). Install horizontal rod E. Pivot (1) must face faucet. Pull assembly (2) down firmly and hold in place. DO NOT TWIST. H.
PAGE 7
4 3 1 2 4 4 FLUSH SYSTEM/CHECK FOR LEAKS. Remove aerator (1) using supplied wrench (2) and move faucet handle (3) to the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Reinstall aerator. Check all connections at arrows for leaks. Re-tighten if necessary, but do not overtighten. DEJE CORRER EL AGUA POR EL SISTEMA/EXAMINE POR SI HAY FILTRACIONES.
PAGE 8
5 1 2 Setting The Handle Limit Stop (Optional) because it limits the amount of hot water in the mix; however, this handle limit stop will not always prevent scalding because it does not compensate for incoming pressure or sudden water temperature changes. This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory.