Specification Sheet

Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Note: Measurements may vary ± 6mm (0.25")
DSP–1600T9 Rev. G Page 6.C.9
Specification Drawing #18
102mm (4")
25mm (1")
Inlet 1/2" copper
203 x 206 x 102mm
(8" x 8 1/8" x 4")
control box
254 x 254mm
(10" x 10")
stainless steel cover plate
Infrared
sensor
Back inlet
urinal connection
outlet hose
206mm
(8 1/8")
Inlet – 1/2"
copper
Slow closing
solenoid valve
Metal
control box
Stainless steel
braided outlet
hose
Screwdriver stop
203mm
(8")
102mm
(4")
206mm
(8 1/8")
Inlet – 1/2"
copper
Metal
control box
Outlet
3/8" M.I.P.
Screwdriver stop
203mm
(8")
102mm
(4")
Slow closing
solenoid valve
Water flow
Spacer
(Replace with
SOLENOID
valve after
system is
flushed.)
Cover
assembly
NOTE:
flow direction
ARROW
on bottom
Slow closing
solenoid valve
(INSTALL: replacing
spacer after system
is flushed.)
SOLENOID may be
ROTATED to ALLOW
for installation of
COVER ASSEMBLY.
Water flow
(Note: Top inlet urinal connections not supplied)
Connects to
3/4" Male
I.P.S. Spud
102mm (4")
25mm (1")
Inlet 1/2" copper
203 x 206 x 102mm
(8" x 8 1/8" x 4")
control box
254 x 254mm
(10" x 10")
stainless steel cover plate
Infrared
sensor
Back inlet
urinal connection
outlet hose
206mm
(8 1/8")
Inlet – 1/2"
copper
Slow closing
solenoid valve
Metal
control box
Stainless steel
braided outlet
hose
Screwdriver stop
203mm
(8")
102mm
(4")
206mm
(8 1/8")
Inlet – 1/2"
copper
Metal
control box
Outlet
3/8" M.I.P.
Screwdriver stop
203mm
(8")
102mm
(4")
Slow closing
solenoid valve
Water flow
Spacer
(Replace with
SOLENOID
valve after
system is
flushed.)
Cover
assembly
NOTE:
flow direction
ARROW
on bottom
Slow closing
solenoid valve
(INSTALL: replacing
spacer after system
is flushed.)
SOLENOID may be
ROTATED to ALLOW
for installation of
COVER ASSEMBLY.
Water flow
(Note: Top inlet urinal connections not supplied)
Connects to
3/4" Male
I.P.S. Spud
102mm (4")
25mm (1")
Inlet 1/2" copper
203 x 206 x 102mm
(8" x 8 1/8" x 4")
control box
254 x 254mm
(10" x 10")
stainless steel cover plate
Infrared
sensor
Back inlet
urinal connection
outlet hose
206mm
(8 1/8")
Inlet – 1/2"
copper
Slow closing
solenoid valve
Metal
control box
Stainless steel
braided outlet
hose
Screwdriver stop
203mm
(8")
102mm
(4")
206mm
(8 1/8")
Inlet – 1/2"
copper
Metal
control box
Outlet
3/8" M.I.P.
Screwdriver stop
203mm
(8")
102mm
(4")
Slow closing
solenoid valve
Water flow
Spacer
(Replace with
SOLENOID
valve after
system is
flushed.)
Cover
assembly
NOTE:
flow direction
ARROW
on bottom
Slow closing
solenoid valve
(INSTALL: replacing
spacer after system
is flushed.)
SOLENOID may be
ROTATED to ALLOW
for installation of
COVER ASSEMBLY.
Water flow
(Note: Top inlet urinal connections not supplied)
Connects to
3/4" Male
I.P.S. Spud
1600T9001 AND
1601T9001
SERIES
1600T9003 AND
1601T9003
SERIES
1600T AND 1601T SERIES
4
PRODUCT NO. VALVE TYPE MOUNT TYPE COVER
1600T 9 0 0 1 Back Inlet Urinal Recessed Mount 254mm (10") Stainless Steel
1600T 9 0 0 3 Top Inlet Urinal Recessed Mount 254mm (10") Stainless Steel
1601T 9 0 0 1 Back Inlet Urinal Recessed Mount 254mm (10") Stainless Steel
1601T 9 0 0 3 Top Inlet Urinal Recessed Mount 254mm (10") Stainless Steel
Note: Rough-in and Trim Ordered Separately
URINAL VALVE ASSEMBLED CONTROL BOX (RECESSED MOUNT)
“RI“ ROUGH-IN MODELS
Supplied assembled as shown in wall box except:
• with spacer in place of solenoid valve
• with temporary cover in place of stainless steel cover
“TR“ TRIM MODELS
Supplied as sensor and over-ride button
attached to stainless steel cover – and
with solenoid valve to replace spacer
DSP–1600T9 Rev. G