Specification

cold water taps
■ Beverage Faucet Collection
■ Single Handle Deck Mount
■ 1 Hole Sink Applications
■ Diamond™ Seal Technology
■ Integrated Supply Tubes
■ Air Gap Included
■ Compatible with RO (Reverse Osmosis)
Systems
■ Traditional or Transitional Styles Available
Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• 9 1/4" (235 mm) high, 5" (127 mm) long, spout
swings 360˚.
• Single lever handle design.
• Diamond™ seal technology.
• Works with RO systems, filtered water systems, or as a cold
water tap.
• Laminar water stream with 1.5 GPM flow @ 60 PSI (5.7L/min).
• 4" (102 mm) maximum deck thickness (2 3/4" (70 mm)
with air gap).
• Mounting wrench to assist in tightening mounting nut securely.
• Integrated supply tube with 3/8" compresssion fitting.
• Air gap included with 1/4" tube for RO system and 3/8" tube
for drain.
0
1
2
3
4
5
0102030405060708090
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
069 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
1914-DST▲
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2011 Masco Corporation of Indiana
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.specselect.com for finish options and product availability.
DSP-K-1914-DST Rev. B
®
®
U
P
C
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.6
Indicates compliance to
ICC/ANSI A117.1
• Verified compliant with .25% weighted average Pb
content regulations.
WARRANTy
• Lifetime Faucet and Finish Limited Warranty to the
original consumer purchaser to be free from defects
in material and workmanship.
• 5 Year Limited Warranty for usage in all industrial,
commercial and business applications.
6 7/8"
(175 mm)
9 1/4"
(235 mm)
5"
(127 mm)
2 27/32"
(96 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
46"
(1168 mm)
37 1/2"
(953 mm)
2 39/64"
(66 mm)
3/8"
Compression
Fittings
1 1/8"
(29 mm)
▲ Designate proper finish suffix
2 7/32"
(56 mm)
8"
(203 mm)
38 3/4"
(984 mm)
4"
(102 mm)
2 3/4"
(70 mm)