User's Manual

ManualsBrandsDelta ManualsNetwork CardDelta 1x9 Bi-Directional Transceiver Module OPBD-155F1J1R

OPBD-155F1J1R

DELTA ELECTRONICS, INC.

1 Revision: S2

03/09/2007

www.deltaww.com

1x9 Bi-Directional Transceiver Module for Fast

Ethernet, ATM, SONET OC-3/SDH STM-1

FEATURES

 RoHS compliant

 Industry Standard 1 x 9 Footprint

 Single Mode Fiber, Bi-Directional

Transmission with 1550nm Transmitter and

1310nm Receiver

 Link Distance up to 15km

 Single +5V power supply and PECL logic

interface

 Wave Solderable and Aqueous Washable

 Bellcore GR-468 compliant

 Laser Class 1 Product which comply with the

requirements of IEC 60825-1 and IEC 60825-2

Description

DELTA’s 1x9 Bi-Directional transceiver is

designed for point-to-point Bi-Directional Optical

Network transmission. The module consists

1550nm FP laser, InGaAs PIN, Preamplifier and

WDM filter in a high-integrated optical

sub-assembly, and it receives up to 155Mbps of

continuous data at 1310nm, and transmits

155Mbps of continuous data at 1550nm.

The module is contained in a 1x9 industry

standard package with a SC receptacle connector,

and support PECL electrical signal Interface and

receiver signal detect output.

Application

 TTC TS-1000

 ITU-T G.985

 IEEE 802.3ah 100BASE-BX/ Fast Ethernet

 SONET OC-3/SDH STM-1/ ATM Network

 FTTx Broadband Access System

Performance

 OPBD-F1J1R data link up to 15km in 9/125um

single mode fiber.

Summary of content (7 pages)

PAGE 1
OPBD-155F1J1R 1x9 Bi-Directional Transceiver Module for Fast Ethernet, ATM, SONET OC-3/SDH STM-1 FEATURES RoHS compliant Industry Standard 1 x 9 Footprint Single Mode Fiber, Bi-Directional Transmission with 1550nm Transmitter and 1310nm Receiver Link Distance up to 15km Single +5V power supply and PECL logic interface Wave Solderable and Aqueous Washable Bellcore GR-468 compliant Laser Class 1 Product which comply with the requirements of IEC 60825-1 and IEC 60825-2 Description Application DELTA’s 1x9 B
PAGE 2
OPBD-155F1J1R 1. Absolute Maximum Ratings Parameter Storage Temperature Operating Ambient Temperature Storage Ambient Humidity Power Supply Voltage Signal Input Voltage Optical Input Power (Peak) Lead Soldering Temperature Lead Soldering Time Symbol Ts Ta HA VCC Min. -40 -10 5 -0.5 -0.3 Typ. Max. 85 80 95 6 Vcc+0.3 0 260 10 Unit ºC ºC % V V dBm ºC sec Min. 0 5 4.75 Typ. Max. 70 85 5.25 250 100 155.52 15 Unit ºC % V mA mVp-p Mbps km Max.
PAGE 3
OPBD-155F1J1R 4. Optical Specification of Receiver Parameter Input Optical Wavelength Receiver Sensitivity Input Saturation Power (Overload) Signal Detect -Assert Power Signal Detect -Deassert Power Signal Detect Hysteresis Optical Receiver Reflectance Output Data Rise/Fall time S/X Endurance Optical Isolation Symbol λIN PIN PSAT PA PD PA-PD Min. 1260 -3 -44 0.5 Typ. Max. 1360 -30 -30 2.5 6 -14 1.
PAGE 4
OPBD-155F1J1R 6. Pin Description Tx/Rx Rx Tx Pin No. 1 2 3 I/O 4 O 5 6 7 8 9 O O I I Pin Name Description VeeR Receiver Ground RD(n) Inverted Receiver Data Output RD(p) Non-Inverted Receiver Data Output Normal Optical Input indicated by logic “High”, and No Optical SD Input indicated by logic “Low”.
PAGE 5
OPBD-155F1J1R 7. Recommended Interface Circuit (AC Coupling) VCC SerDes 3.3V 5V TxD 8 TX+ Laser C4 R4 C5 Delta Transceiver C1 VCCRx VCC SerDes 5V 3.3V L2 C2 SD 4 RxD 3 L1 S D to upper leve l R13 RD- Amplifier C6 RxD R11 LIMITING PreAm p 2 RD+ C1/2/3 R8 1 R7 C7 RxGND DRIVER Serializer/ De s e rialize r C3 5 R9 Signal detect R5 6 TX- R10 VCCTx R6 7 R3 Driver ECL/PECL Receiver PLL etc. R12 TxD VCC R2 9 R1 TXGND = 4.
PAGE 6
OPBD-155F1J1R 8. Outline Dimensions Parameter Mechanical Dimensions Connector Type Unit mm - Description 50.4x25.4x10.8 SC Receptacle Connector Note IEC-61754-4 Week (52Weeks/Year) : 1月2日=01 6 DELTA ELECTRONICS, INC. Revision: S2 03/09/2007 www.deltaww.
PAGE 7
OPBD-155F1J1R 9. Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Test Method Reference Performance Human Body Model MIL-STD-883E Method 3015.7 (HBM) EIA-JESD22-A114 Pins Machine Model (MM) EIA-JESD22-A115 Electrostatic Discharge (ESD) to the Simplex Receptacle Contact Discharge Air Discharge Radio Frequency Electromagnetic Field Immunity IEC/EN 61000-4-2 IEC/EN 61000-4-3 (1) Satisfied with electrical characteristics of product spec.