Dimensions Guide

2179LF
Delta reserves the right (1) to make changes in specications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for nish options and product availability.
DSP-K-2179LF Rev. C
STANDARD SPECIFICATIONS:
WARRANTY
COMPLIES WITH:
55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, Ontario Canada N5P 4L1
© 2015 Masco Corporation of Indiana
• ASME A112.18.1 / CSA B125.1
• Maximum low rate 1.5 gpm @ 60 psi, 5.7 L/min @ 414 kPa.
• Two handle bar sink faucet for exposed mounting on 2 and 3
hole sinks with 4" centers.
• 4" (102mm) centerset.
• 4" (102mm) long, 10 3/8" (264mm) high spout, swings 360°.
• All operating parts shall be replaceable from the top.
• Hot and cold stems are interchangeable.
• 1/2"-14 NPSM threaded male inlet shanks.
• Control mechanism is a rotating cylinder type with stainless
steel plate and 90° rotating, with replaceable non-metallic
seats.
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and inishes; or,
for commercial users, for 5 years from the date
of purchase.
• 5 year limited warranty on electronic parts (other
than batteries); or for commercial users, for 1 year
from the date of purchase. No warranty is provided
on batteries.
1"
(25 mm)
Max. Deck
Thickness
4"
(102 mm)
Centers
6 3/8"
(162mm)
1/2"-14 NPSM
2 13/16"
(72mm)
10 3/8"
(264 mm)
2 X 1 1/8"~1 1/2"
(29~38 mm)
Hole Size
4 " (102mm)
360˚ Swing Spout
Min.2 1/2" (64 mm)
Clearance to Back
Splash Recommended
7 9/16"
(193 mm)
BAR & PREP
SINK FAUCETS
1 3/8"
(35mm)
2 1/8" (54 mm)
■
Two Handle, Deck Mount
■ 2 and 3 Hole Sink Applications
• Veri ied compliant with 0.25% weighted average
Pb content regulations.
Submitted Model No.:
Specic Features:
Indicates compliance to
ICC / ANSI A117.1
■ 4
"
Centerset