Specification Sheet

Lavatory Faucets
4" Centerset- CER-TECK ceramic structures
Model No: 21C193
SPECIFICATION:
•
HEAVY DUTY CAST BRASS centerset faucet
•
102mm (4") centers, two handle
•
Polished chrome plated finish with polished underspout
•
Metal hold-down package
•
4" Centerset- CER-TECK ceramic structures
•
Outlet#: 9 - Vandal Resistant 0.35 gpm (1.32 L/min.) Non-Aerating Spray
Outlet
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant (VR) screws
•
Standard Product Less Pop-up (No Pop-up Hole)
COMPLIES WITH:
•
CSA certified
•
Complies to ASME A112.18.1/CSA B125.1
•
Verified compliant with 0.25% weighted average Pb content regulations
•
Handles No. 2, 3, 4 and 5
Indicates compliance to ICC/ANSI A117.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced December 05, 2016.
- 1.0.20700
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]