Specification

Lavatory Faucets
4" (102mm) centerset
less pop-up (no pop-up hole)
Model No: 22C101
SPECIFICATION:
•
Cast Brass Single Control Lavatory Faucet
•
Ceramic cartridge with high temperature rotational limit stop
•
Metal hold-down package
•
Colour coded plug button on handle for hot/cold identification
•
Integrated volume and temperature control
•
4" (102mm) centerset, less pop-up (no pop-up hole)
•
Chrome Finish
•
Outlet: Vandal Resistant outlet (wrench flats) 1.5 USGPM (5.7L/min)
•
Handle#: 1 - Vandal Resistant 89mm(3 1/2") lever handle - ADA compliant-
colour indexed
COMPLIES WITH:
•
CSA certified.
•
IAPMO listed
•
Complies to ASME A112.18.1
•
Verified to <0.25% Pb average wetted surface regulations
•
(Contact Delta Representative for State and/or Local Approvals)
•
3 1/2" lever handle {ADA}ADA compliant and meets Handicapped
Accessibility Standard ASME A117.1 of less than 5 lbs. operating force
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area.
- 1.0.36988
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]