Specification
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Note: Measurements may vary ± 6mm (0.25")
51mm
(2.0")
97mm
(3.8")
89mm
(3.5")
32mm
(1.25") MIN.
**3 HOLES
*
305mm
(12.0")
152mm
(6.0")
1/2" -14 NPSM
27mm
(1.06") MAX
102mm
(4.0")
Widespread Lavatory Faucets
6"-12" Centers
Page 1.C.8 DSP–23C Rev. E
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
CAST SPOUT
(1.75")
44mm
10°
D
114mm
(4.5")
66mm
(2.6")
51mm
(2")
GOOSENECK SPOUT ASSEMBLIES
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck-Standard (R2) for outlets #2, 3, 4, 5 114 4.5 104 4.1 170 6.7
Gooseneck-Standard (R2) for outlet #7 114 4.5 97 3.8 178 7.0
GOOSENECK SPOUT #6
Outlet #7Outlets #2, 3, 4, 5
(1.75")
44mm
A
L
C
26mm
(1.01")
D
44mm
(1.75")
A
L
C
26mm
(1.01")
**Spout hole 38mm (1.5") maximum diameter.
76mm
(3.0")
53mm
(2.1")
96mm
(3.77")
73mm
(2.9")
102mm
(4.0")
3
2
FRONT VIEWS
FLOW RATE vs PRESSURE
FLOW
(L/min.)
FLOW
(GPM)
2.5
2
1.5
1
.5
00
1
2
3
4
5
6
7
8
9
01020304050607080
Line Pressure (psig)
Spout Outlets
No. 3 & 4 Aerator
No. 7 Flow Control
No. 2 Laminar Flow Outlet
No. 5 Low Flow Outlet
Outlet Flow Rates
* CAN BE CUT IN FIELD TO 152mm (6.0") MINIMUM
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM
COUPLING NUT (NOT SUPPLIED)
LIMITED SWING
GOOSENECK
❏ Add suffix “- LS” to Product Number
for 120° Limited Swing – Available on
#6 Product Variation ONLY
4
96mm
(3.77")
95mm
(3.7")
118mm
(4.7")
152mm
(6.0")
135mm
(5.3")
5
HANDLE TEMPERATURE
INDICATORS
❏
Add suffix “-TI” to Product Number for
handle temperature indicators “H” (red),
“C” (blue).
Availaible on handle options 2, 3 or 4 only.
2 18 0.69 11 0.45
3 18 0.69 11 0.45
4 17 0.67 11 0.45
5 18 0.69 11 0.45
GOOSENECK
SPOUT “D”
CAST
SPOUT “D”
OUTLET
NO.
mm mmin. in.
FOR OPTIONAL
RIGID/SWIVEL &
LIMITED SWING
SPOUTS
See DSP-R/S for detailed
specification
Approvals:
• CSA certified
• Complies to ASME A112.18.1/CSA B125.1
•
Handles No. 2, 3, 4, and 5
Indicates compliance to
ICC/ANSI A117.1
•
Outlet options 2, 3, 4 and 7 are
EPA WaterSense listed
• Verified compliant with 0.25% weighted
average Pb content regulations
( Contact Delta Representative for State and/or
Local Approvals.)
DSP–23C Rev. E