Specification Sheet

Lavatory Faucets
Widespread with CER-TECK® ceramic structures
Model No: 23C673-R35
SPECIFICATION:
•
Two handle widespread lavatory faucet
•
152 to 305mm (6" to 12") adjustable centers
•
Polished chrome plated finish trim
•
CAST BRASS bodies
•
4 1/2" CAST BRASS spout or 3/8" IPS BRASS PIPE Rigid/Swivel
Gooseneck Spout
•
Metal hold-down package
•
Color indexed metal handles with vandal resistant screws
•
CER-TECK® 1/4 turn ceramic structures
•
Spout: R35 - Gooseneck-6.0" spout reach -8.3" height (unmounted)-
Standard rigid/swivel field installation unless LS Limited swing option
selected-Vandal resistant .090" wall thickness
•
Outlet#: 7 - Smooth Spout End with Laminar Flow Control in Spout Base -
1.0 GPM (3.8L/min)
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant (VR) screws
•
Heavy Duty Rigid/Swivel Inline (R2) Gooseneck Spout Less Pop-up
COMPLIES WITH:
•
CSA certified
•
Complies to ASME A112.18.1/CSA B125.1
•
Verified compliant with 0.25% weighted average Pb content regulations
•
Handles No. 2, 3, 4, and 5
Indicates compliance to ICC/ANSI A117.1
•
Outlet options 2, 3, 4 and 7 are EPA WaterSense listed
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced December 06, 2016.
- 1.0.20700
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]