Installation Guide

ManualsBrandsDelta ManualsKitchen AppliancePilar 2-Handle Side Sprayer Kitchen Faucet in Venetian Bronze

TWO HANDLE WIDESPREAD

KITCHEN FAUCETS

DOS GRIFOS EXTENSOS DE LA

COCINA DE LA MANIJA

ROBINETS À GRAND ENTRAXE À DEUX

MANETTES POUR ÉVIERS DE CUISINE

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Para instalación fácil de su llave Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant de débuter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

Models/Modelos/Modéles

2256-DST & 2480-DST

Series/Series/Seria

SILICONE

Icons

10/1/15 Rev. B

Icons

77539

www.deltafaucet.com

Summary of content (12 pages)

PAGE 1
TWO HANDLE WIDESPREAD KITCHEN FAUCETS DOS GRIFOS EXTENSOS DE LA COCINA DE LA MANIJA ROBINETS À GRAND ENTRAXE À DEUX MANETTES POUR ÉVIERS DE CUISINE 77539 Models/Modelos/Modéles 2256-DST & 2480-DST Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
Cleaning and Care Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.
PAGE 3
A. 1 B. 2 3 1 4 3 2 1 1 1 2 Spout Installation If you are installing the faucet on a Stainless Steel or a thin sink use RP37490 Stablization Plate SUPPLIED WITH FAUCET. A. SHUT OFF WATER SUPPLIES. Assemble base (1) and gasket (2). Place base and gasket over mounting hole for the spout. Slide spout tube and shank (3) through base and position spout assembly onto base (Note the “F” (4) is positioned toward the front). OPTION: If surface is uneven, use silicone sealant under the gasket. B.
PAGE 4
2 A. 5 Correct End Valve Orientation La Orientación de la Válvula Extrema Bonne configuration de la soupape Hot/Caliente/Chaude Cold/Fría/Froide 6 1 Open/Abrir/Ouvert Valves shown in closed position. Las válvulas en la posición cerrada. Soupapes montrées en position fermée. 5 2 3 6 2 3 1 4 Hot Label Etiqueta Caliente Étiquette eau chaude A. Slide end valves (1) with gaskets (2) and bushings (3) through sink.
PAGE 5
B. C. 1 1 1 1 3 3 1 Line 2 1 1 2 2 B. Slide Y-shaped connector (1) into adapter (2) and secure with clip (3). Pull Delta is not responsible for tubing that is cut too short or cut in a way that will not allow for a leak-free joint. Potential Problems and Remedies l Tubing is not cut perpendicular to the axis of the tube: carefully make an additional cut, being careful not to cut the tube too short.
PAGE 6
3 B. A. B-2 B-1 3 3 1 1 2 2 4 1 3 B-3 4 1 1 For Models With A Side Spray A. Mount spray support assembly (1) in far right hole in sink. HAND TIGHTEN ONLY. Insert spray hose (2) down through spray support. B. Pull diverter clip (1) outward until loose; but, do not completely remove. Remove diverter cap (2) from diverter (3) and keep somewhere safe in case you choose not to have a side spray later on. Keeping the diverter clip pulled out, insert spray hose nipple (4) into diverter (3).
PAGE 7
4 A. B. 2 2 1 OR 2 3 O OU 4 3 1 1 2 4 A. Water Line Connections Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression, with ends colored red for hot and blue for cold. Loop tubing (2) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (3) on faucet tube to supply valve connection (4) and hand tighten, then tighten one additional turn with wrench. DO NOT OVERTIGHTEN. Repeat for other tube.
PAGE 8
Correct method Método Correcto Bonne méthode Incorrect Installation Instalación Incorrecta Installation Incorrecte 2 3 1 4 Custom Fit Connections - Plastic Sleeve Installation Instructions 1. Identify desired length of tube (1). Leave 1" - 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (3) onto cut tube. Ensure sleeve is oriented as shown. 3. Insert tube into outlet fitting (4).
PAGE 9
5 To Change the Position of Handle Stop (5). Para cambiar la posición de el tope (5). Pour changer la position de la butée (5). 3 1 Cold Fría Froide Hot Caliente Chaude 3 5 5 5 2 3 5 4 3 1 2 Arrow faces spout on both hot & cold sides. Hot Caliente Chaude Maintenance Remove aerator (1) using supplied wrench (2) and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one minute.
PAGE 10
2256-DST Models/Modelos/Modèles RP70746 Aerator Aereador Aérateur RP52217 Wrench Llave Clé RP53996 Tube Clip Presilla del tubo Agrafe de tube RP64476▲ Handle Assembly Ensamble de las Manijas Manette RP41896 Glide Ring Argolla deslizable Anneau de glissement RP60352 Bonnet Nuts Bonetes/Capuchones Chapeaux Filetés RP60400 Valve Assembly Ensamble de la Válvula Soupape RP63976▲ Base & Gasket Base y Empaque Embase et Joint RP62378 End Valve Bushings Bujes de la válvula del extremo Douilles de valve d’extrémi
PAGE 11
2480-DST Models/Modelos/Modèles RP70746 Aerator Aereador Aérateur RP52217 Wrench Llave Clé RP63973▲ Handle Assembly Ensamble de las Manijas Manette RP41896 Glide Ring Argolla deslizable Anneau de glissement RP60352 Bonnet Nuts Bonetes/Capuchones Chapeaux Filetés RP60400 Valve Assembly Ensamble de la Válvula Soupape RP63974▲ Base & Gasket Base y Empaque Embase et Joint RP53996 Tube Clip Presilla del tubo Agrafe de tube RP62378 End Valve Bushings Bujes de la válvula del extremo Douilles de valve d’extré
PAGE 12
77539 Rev.