Installation Instructions

ManualsBrandsDelta ManualsBathClassic 4 in. Centerset 2-Handle Bathroom Faucet in Chrome

TWO HANDLE LAVATORY

CENTERSET FAUCETS

LLAVES DE DOS MANIJAS DE

MONTURA DE CENTRO PARA

LAVAMANOS

ROBINETS À ENTRAXE COURT

À DEUX POIGNÉES

Models/Modelos/Modèles

2500LF, 2502LF, 2503LF,

2510LF, 2512LF, 2520LF,

2522LF & 2523LF

Series/Series/Seria

Para instalación fácil de su llave Delta

usted necesitará:

•LEER TODAS las instrucciones completamente

antes de empezar.

•LEER TODOS los avisos, cuidados, e

información de mantenimiento.

•Comprarlasconexionescorrectasparael

suministro de agua.

For easy installation of your Delta

faucet you will need:

•ToREAD ALL the instructions completely

before beginning.

•To READ ALL warnings, care, and

maintenance information.

•Topurchasethecorrectwater supply hook-up.

SILICONE

Icons

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:

SILICONE

Icons

SILICONE

Icons

Pour installer votre robinet Delta

facilement, vous devez:

•LIRE TOUTES les instructions avant de débuter;

•LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

•Acheterlebonnécessairederaccordement.

SILICONE

Icons

4/30/12    Rev.C

70743

www.deltafaucet.com

Summary of content (8 pages)

PAGE 1
TWO HANDLE LAVATORY CENTERSET FAUCETS 70743 LLAVES DE DOS MANIJAS DE MONTURA DE CENTRO PARA LAVAMANOS ROBINETS À ENTRAXE COURT À DEUX POIGNÉES Models/Modelos/Modèles 2500LF, 2502LF, 2503LF, 2510LF, 2512LF, 2520LF, 2522LF & 2523LF Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
WARNING: CLEANING AND CARE Scrubbing Bubbles ® Bathroom Cleaner and Lysol ® Basin Tub and Tile Cleaner must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles. If overspray gets onto the handles, immediately wipe them dry with a soft cotton cloth. Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish.
PAGE 3
RP70543 Blade Handle Kit Manija Poignée RP70541 Knob Handle Kit Manija Redonda Poignée Ronde RP2412 Buttons Botones Boutons RP5885 Screws Tornillos Vis RP64364▲ Lever Handle Kit Manija Palanca Poignée de Levier RP18373 Buttons Botones Boutons RP5885 Screws Tornillos Vis ▲Specify Finish Especifíque el Acabado Précisez le Fini RP6146▲ Lift Rod Barra de Alzar Tige de Manoeuvre RP24097 1/4 Turn Stop Parada (Tope) a un 1/4 de Rotación Butée 1/4 de Tour RP6060, RP6060SB Bonnet Nuts Bonetes/Capuchone
PAGE 4
Notes / Notas / Notes 4 70743 Rev.
PAGE 5
1 2 1 1/2" (13 mm) IPS 2 1 3 A B Make connections to water lines. Use 1/2" IPS faucet connections (A), or use the supplied coupling nuts (1) with 3/8" O.D. ball-nose risers (B). Position faucet (1) and gasket (2) on sink. Hand tighten nuts (3). Option: If sink is uneven, use silicone under the gasket. If you are installing a model with pop-up, complete step 3 or 4. Coloque la llave (1) y el empaque (2) en el lavamanos. Apriete a mano las tuercas (3).
PAGE 6
E. D. C. B. 1 LI C ON E 1 SI 3 A. 2 3 2 3 1 2 1 1 2 2 G. F. 4 H. 5 4 3 2 1 5 1 2 3 2 1 6 Step 3b Metal Pop-up A. Remove stopper (1) and flange (2). B. Screw nut (1) all the way down. Push washer (2) and gasket (3) down. C. Remove tailpiece (1) from body (2), add plumber tape (3), replace tailpiece. Step 3e D. Apply silicone to underside of flange (1). horizontal rod G. Remove pivot nut (1). Install Step 3c E. Pivot (1) must face faucet. Pull assembly H.
PAGE 7
A. C. B. NE I CO 1 S IL 4 3 5 5 2 3 2 4 D. 4 F. E. 12 1 11 8 3 2 8 7 6 9 10 Pop-Ups with Metal Flange and Plastic Tail Piece A. Remove stopper (1), brass nut & washer (2), black gasket (3) and tail piece (4). B. Apply silicone to underside of flange (5). Insert flange into sink. C. Install black gasket (3), washer and brass nut (2) onto flange (5) from below sink but do not tighten brass nut (2). Screw on tail piece (4) and hand tighten. D.
PAGE 8
5 1 3 2 2 2 1 1 2 3 3 2 1 2 1 4 Maintenance Remove aerator (1) using supplied wrench (2), and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water supplies (4) and flush water lines for one minute. Important: This flushes away any debris that could cause damage to internal parts. Verify the seal is attached to aerator then reinstall. Note: For future use, aerator wrench (2) can be clipped to the supply line after flushing faucet.