Use and Care Manual

9
PACKAGED CONTENTS LIST
A. Delta Cruzer 26-2240
B. Blade Wrench
C. Work Clamp
D. Dust Bag
Figure 3
UNPACKING
Before moving/transporting your saw it is important to make sure all of the following steps have been followed to
ensure a safe condition for transportation. Failure to do so can result in serious personal injury.
• Always turn the power off and unplug saw before transporting.
• Secure power cord to avoid any snags or hang ups during transportation.
• Always lift using the strength of your legs to lift saw; never use your back muscles to lift saw.
• Do not use power On/Off switch handle or power cord to lift your saw.
• Always place the saw onto a stable and level surface with clearance for handling and maneuvering.
SAW HEAD LOCK PIN
Always lock saw head in the down position before transporting
saw. To engage saw head lock pin (A): Push saw head to the
down position then push-in lock pin shown in Fig 4.
Saw Head lock pin is for storage and
transport only. This saw should never be locked in the down
position while making cuts.
A
B
SLIDE PREVENTION LOCK
Always engage the slide prevention lock (B) before
transporting this saw. To engage slide prevention lock: Push
saw head to the fully retracted position then swing the lock
link down as shown in Fig. 4.
Figure 4
MOUNTING AND TRANSPORTATION
PREPARATIONS FOR TRANSPORTATION
A
C
B
D