Full Product Manual

10 11
PACKAGED CONTENTS LIST
A. Delta Cruzer 26-2251
B. Blade Wrench
C. Work Clamp
D. Dust Bag
E. Support Extensions x 2 pcs
Figure 3
B
D
E
UNPACKING
Before moving/transporting your saw it is important to make sure all of the following steps have been followed to
ensure a safe condition for transportation. Failure to do so can result in serious personal injury.
• Always turn the power o and unplug saw before transporting.
• Secure power cord to avoid any snags or hang ups during transportation.
• Always lift using the strength of your legs to lift saw; never use your back muscles to lift saw.
• Do not use power On/O switch handle or power cord to lift your saw.
• Always place the saw onto a stable and level surface with clearance for handling and maneuvering.
Always lock saw head in the down position before transporting
saw. To engage saw head lock pin (A): Push saw head to the
down position then push-in lock pin shown in Fig 4.
Saw Head lock pin is for storage and
transport only. This saw should never be locked in the down
position while making cuts.
A
B
Always engage the slide prevention lock (B) before
transporting this saw. To engage slide prevention lock: Push
saw head to the fully retracted position then swing the lock
link down as shown in Fig. 4.
Figure 4
MOUNTING AND TRANSPORTATION
SAW HEAD LOCK PIN
SLIDE PREVENTION LOCK
PREPARATIONS FOR TRANSPORTATION
A
C