Specification Sheet

Sink Faucet Deckmount
8" Deck- CER-TECK® ceramic structures
Model No: 26C3943-R2
SPECIFICATION:
•
Heavy Duty Cast Brass sink faucet
•
203 mm (8") centers
•
Two handle
•
Polished chrome plated finish
•
Metal hold-down package
•
CER-TECK® ceramic structures
•
Spout: R2 - Gooseneck spout-4.5" radius -Standard rigid/swivel field
installation-Vandal resistant .090" wall thickness(R2)
•
Outlet#: 4 - Standard 1.5 GPM (5.7 L/Min) Flow Control Aerator
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant screws
COMPLIES WITH:
•
Verified to <0.25% Pb average wetted surface regulations
•
CSA certified.
•
Complies to ASME A112.18.1/CSA B125.1
•
(Contact Delta Representative for State and/or Local Approvals)
•
3" lever blade handle ADA compliant and meets Handicapped Accessibility
Standard ICC/ANSI A117.1 of less than 5 lbs. operating force
(Dimensional drawing on following page)
•
Not Available
OPERATION:
NOTES:
Verified to <0.25% Pb average wetted surface regulations
CA/VT Compliance:
This COMPLETE SERIES is ONLY available as CA/VT Compliant product
as of Nov. 1, 2009.
The Product Numbers have NOT changed.
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced July 18, 2013.
- 1.0.25518
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]