Use and Care Guide

Cast Deckmount Sink Faucets
8” Centers
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
DSP–26C3/T Rev. A
Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
GOOSENECK SPOUT ASSEMBLIES
“A”“C”“L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R4) for outlets #2, 3, 4 152 6 124 4.9 146 5.8
Gooseneck–Standard (R4) for outlets #7 152 6 117 4.6 152 6.0
See Page 9.C.1 for
additional optional
spouts.
Spout “A”“C”“L”
No. SPOUT TYPE mm in. mm in. mm in.
1 8" Wallform Spout (S2) 206 8.1 15 0.6 130 5.1
2 8" Tubular Spout (S5) 185 7.3 41 1.6 147 5.8
Approvals:
• CSA certified
• Complies to ASME A112.18.1
• Lever Blade Handles No. 2, 3, 4, and 5,
ADA Compliant and meet Handicapped
Accessibility Standard ASME A117.1
of less than 5 lbs. operating force.
• IAPMO listed
(Contact Delta Representative for State and/or
Local Approvals.)
FLOWRATE vs PRESSURE
SWING SPOUT
FRONT VIEW
2.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Spout Outlets
No. 3 & 4 Aerator No. 2 Laminar Flow Outlet
Line Pressu re (psig)
FLOW
(l/min.)
FLOW
(USGPM)
No. 7 Flow Control
Outlet Flowrates
OUTLET “D”
NO.
mm in.
2 18 0.69
3 18 0.69
4 17 0.67
89mm
(3.5")
102mm
(4.0")
117mm
(4.6")
203mm
(8.0")
267mm
(10.5")
25mm
(1.0") MIN.
2 HOLES
44mm
(1.75") MAX.
DECK THICKNESS
97mm
(3.8")
102mm
(4.0")
96mm
(3.77")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
See Page 9.C.2 for
additional optional
spouts.
SWING SPOUT ASSEMBLIES
GOOSENECK SPOUT
Outlets #2, 3, 4 Outlet #7
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
C
87mm
(3.4")
76mm
(3.0")
76mm
(3.0")
4
2
1
3
INLET FOR 3/8”
OR 1/2” FLEXIBLE
RISER OR 1/2-14
NPSM COUPLING
NUT (SUPPLIED)
LIMITED SWING
GOOSENECK
Add suffix “- LS” to Product
Number for 120º Limited Swing
INLETS - 1/2'' MIP/Coupling Nuts
Note: Measurements may vary ± 6mm (0.25'')
141mm
(5.5")
135mm
(5.3")
152mm
(6.0")
5
HANDLE TEMPERATURE
INDICATORS
Add suffix “-TI” to Product Number
for handle temperature indicators
“H” (red), “C” (blue).
Available on handle options 2, 3,
or 4 only.