Specification Sheet
Sink Faucet Deckmount
8" Deck- CER-TECK® ceramic structures
Model No: 26C3972-R7
SPECIFICATION:
•
Heavy Duty Cast Brass sink faucet
•
203 mm (8") centers
•
Two handle
•
Polished chrome plated finish
•
Metal hold-down package
•
CER-TECK® ceramic structures
•
Spout: R7 - Smooth End Gooseneck-9.0" spout reach -12.7" height
(unmounted)-Standard rigid/swivel field installation unless LS Limited swing
option selected-Vandal resistant .090" wall thickness
•
Outlet#: 7 - Smooth Spout End with Laminar Flow Control in Spout Base -
1.0 GPM (3.8L/min)
•
Handle#: 2 - 102 mm (4") Hooded Blade Handles-ADA compliant-Metal-
Color indexed-Vandal resistant screws
COMPLIES WITH:
•
Verified compliant with 0.25% weighted average Pb content regulations
•
CSA certified.
•
Complies to ASME A112.18.1/CSA B125.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced December 13, 2016.
- 1.0.20700
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030