Specification Sheet

Sink Faucet Deckmount
8" deck LESS hose and spray - CER-TECK® ceramic
structures
Model No: 27C2232-S7
SPECIFICATION:
•
Below deckmount sink faucet
•
203 mm (8") centers, two handle
•
Polished chrome plated finish
•
Cast brass bodies
•
Metal hold-down package
•
CER-TECK® 1/4 turn ceramic structures
•
CER-TECK® ceramic structures
•
Spout: S7 - 279mm (11") Tubular Swing Spout(S7)
•
Outlet#: 3 - Vandal Resistant Aerator Outlet- 1.5 GPM (5.7 L/min) Flow
Rate at 60 psi- pressure compensating
•
Handle#: 2 - 102 mm (4") Hooded Blade Handles-ADA compliant-Metal-
Color indexed-Vandal resistant screws
COMPLIES WITH:
•
CSA certified
•
Complies to ASME A112.18.1/CSA B125.1
•
Verified compliant with 0.25% weighted average Pb content regulations
•
CSA certified.
•
Complies to ASME A112.18.1/CSA B125.1
•
Handles No. 2, 3, 4, and 5 Indicates compliance to ICC/ANSI A117.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
NOTES:
Verified to <0.25% Pb average wetted surface regulations
CA/VT Compliance:
This COMPLETE SERIES is ONLY available as CA/VT Compliant product
as of Nov. 1, 2009.
The Product Numbers have NOT changed.
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced December 01, 2016.
- 1.0.20700
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]