Specification Sheet

Refer to www.specselect.com for individual models. Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation.
Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Note: Measurements may vary ± 6mm (0.25")
TECK
89mm
(3.5")
102mm
(4.0")
117mm
(4.6")
102mm
(4.0")
156mm
(6.13")
25mm
(1.0") MIN.
2 HOLES
44mm
(1.75") MAX.
DECK THICKNESS
1/2"-14 NPSM
Page 3.C.16 DSP –27C45 Rev. B
Cast Deckmount Sink Faucets
4" Centers
SWING SPOUTS
FLOW RATE vs PRESSURE
2.5
2
1.5
1
.5
00
0
1
2
3
4
5
6
7
8
9
10 20 30 40 50 60 70 80
Line Pressure (psig)
FLOW
(L/min.)
FLOW
(GPM)
Spout Outlets
No. 2 Laminar Flow Outlet
No. 7 Flow Control
No. 3 & 4 Aerator
No. 5 Low Flow Outlet
Outlet Flow Rates
DECK FAUCET
Outlets #2, 3, 4, 5 Outlet #7
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
C
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
C
51mm
(2.0")
30mm
(1.2")
A
C
L
D
A
L
51mm
(2.0")
30mm
(1.2")
51mm
(2.0")
27mm
(1.06")
A
D
C
L
C
4
97mm
(3.8")
102mm
(4.0")
96mm
(3.77")
2
76mm
(3.0")
76mm
(3.0")
3
INLET FOR 3/8" OR 1/2" FLEXIBLE RISER
OR 1/2-14 NPSM COUPLING NUT (NOT SUPPLIED)
GOOSENECK SPOUTS
141mm
(5.5")
135mm
(5.3")
152mm
(6.0")
5
HANDLE TEMPERATURE
INDICATORS
❏ Add suffix “-TI” to Product Number for
handle temperature indicators “H” (red),
“C” (blue).
Availaible on handle options 2, 3 or 4 only.
OUTLET “D”
NO.
mm in.
2 18 0.69
3 18 0.69
4 17 0.67
5 18 0.69
GOOSENECK SPOUT ASSEMBLY #8
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R2) for outlets #2, 3, 4, 5 114 4.5 104 4.1 170 6.7
Gooseneck–Standard (R2) for outlet #7 114 4.5 97 3.8 178 7.0
GOOSENECK SPOUT ASSEMBLY #9
“A” “C” “L”
SPOUT/OUTLET mm in. mm in. mm in.
Gooseneck–Standard (R4) for outlets #2, 3, 4, 5 152 6 124 4.9 146 5.8
Gooseneck–Standard (R4) for outlet #7 152 6 117 4.6 152 6.0
SWING SPOUT ASSEMBLIES
“A” “C” “L”
SPOUT TYPE mm in. mm in. mm in.
2 8" Tubular Spout (S5) 185 7.3 41 1.6 147 5.8
3 6" Tubular Spout (S3) 140 5.5 38 1.5 107 4.2
SPOUT
NO.
❏ Add suffix “-LS” to Product Number for
120º Limited Swing
LIMITED SWING GOOSENECK
FOR OPTIONAL RIGID/SWIVEL
& LIMITED SWING SPOUTS
See DSP-R/S for detailed specification
FOR OPTIONAL SWING SPOUTS
See DSP-S/S for detailed specification
Approvals:
• CSA certified
• Complies to ASME A112.18.1/CSA B125.1
•
Handles No. 2, 3, 4, and 5
Indicates compliance to ICC/ANSI A117.1
•
Outlet options 2, 3, 4 and 7 are
EPA WaterSense listed
• Verified compliant with 0.25% weighted
average Pb content regulations
( Contact Delta Representative for State and/or
Local Approvals.)
DSP –27C45 Rev. B