Specification Sheet
Sink Faucet Wallmount
8" Wallmount WITH Integral Check Stops - CER-
TECK®
Model No: 28C2014
SPECIFICATION:
•
203 mm (8") centers cast brass wallmount service sink faucet
•
Centers adjustable from 7.75" to 8.25" unless AC option selected
•
Two handle
•
With integral check stops
•
Polished chrome plated finish
•
Heavy duty 1/2" IPS brass pipe rigid pail hook spout
•
CER-TECK® 1/4 turn ceramic disk structures
•
Spout: 0 - 140 mm (5 1/2") Short Rigid Spout with Pail Hook, No Brace
•
Outlet#: 1 - Body Mounted Double Check Vacuum Breaker (used when
shutoff installed after outlet)-Garden Hose End on spout
•
Handle#: 4 - 102 mm (4") Blade Handles- ADA Compliant-Sanitary Hoods-
Metal-Color indexed-Vandal resistant screws
COMPLIES WITH:
•
CSA certified
•
Complies to ASME A112.18.1/CSA B125.1
•
Certified under CSA Standard B64.8 and meets ASSE 1035
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced December 22, 2016.
- 1.0.25277
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - (317) 848-1812
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - (905) 712-3030