Specification Sheet

Sink Faucet Wallmount
8" Wallmount LESS Integral Check Stops -CER-
TECK®
Model No: 28C4923-R17
SPECIFICATION:
•
203 mm (8") centers cast brass wallmount sink faucet
•
Centers adjustable from 7.75" to 8.25" unless AC option selected
•
Two handle
•
Polished chrome plated finish
•
LESS integral stops
•
CER-TECK® 1/4 turn ceramic disk cartridges
•
Spout: R17 - Double Joint spout - 14.1" spout reach -9.5" height
(unmounted)-Standard rigid/swivel field installation base with tubular swing
spout(S5)
•
Outlet#: 2 - Vandal Res.1.5 GPM (5.7 L/Min) Laminar w/Agion®
Antimicrobial
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant screws
COMPLIES WITH:
•
Verified compliant with 0.25% weighted average Pb content regulations
•
CSA certified.
•
Complies to ASME A112.18.1/CSA B125.1
•
Verified compliant with 0.25% weighted average Pb content regulations
•
Indicates compliance to ICC/ANSI A117.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced December 22, 2016.
- 1.0.25277
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]