Specification Sheet

Sink Faucet Wallmount
8" Wallmount WITH Integral Check Stops - CER-
TECK®
Model No: 28C8183-AC
SPECIFICATION:
•
203 mm (8") centers cast brass wallmount sink faucet
•
Two handle
•
Centers adjustable from 7.75" to 8.25" unless AC option selected
•
Rough chrome plated finish
•
With integral check stops
•
Heavy Duty 1/2" IPS Brass pipe rigid pail hook spout
•
CER-TECK® 1/4 turn ceramic disk cartridge
•
Spout#: 1 - Long Rigid Spout with Pail Hook, ADJUSTABLE Top/Bottom
Brace
•
Outlet#: 8 - Body mounted Angle Vacuum Breaker-Garden Hose End outlet
on spout
•
Handle#: 3 - 76 mm (3") Lever Blade Handles-ADA Compliant-Metal-Color
indexed-Vandal Resistant screws
•
(AC)-with 5-1/2" to 10-1/2" Adjustable Centers
COMPLIES WITH:
•
CSA certified.
•
Complies to ASME A112.18.1/CSA B125.1
•
(Contact Delta Representative for State and/or Local Approvals)
•
3" lever blade handle ADA compliant and meets Handicapped Accessibility
Standard ICC/ANSI A117.1 of less than 5 lbs. operating force
•
Angle vacuum breaker certified under ASSE Standard 1001 and CSA
Standard B64.1.1
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced July 18, 2013.
- 1.0.25518
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]