Instruction manual

DUST BAFFLE

1. DISCONNECT MACHINE FROM

POWER SOURCE.

2. Remove the two screws (A) Fig. 3, and loosen the

two screws (B).

3. Remove the back cover of the cabinet (C) Fig. 3.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

4. Loosen the four nuts (D) Fig. 4, and lower the motor.

5. Insert the dust baffle (F) Fig. 5, through the front of

the cabinet.

6. Align the four slots in the dust baffle with the four

holes (G) Fig. 6, in the top of the cabinet.

7. Insert a 1/4-20x5/8" flat head screw through hole (G)

Fig. 6 in the top of the cabinet and the dust baffle. Place

a 1/4" flat washer onto the screw, thread a 1/4-20 hex

nut onto the screw, from the inside of the cabinet and

tighten securely.

8. Repeat this process for the three remaining holes in

the top of the cabinet and the dust baffle.

CABINET

TOP