Instructions / Assembly

1. Attach the front rail (1) to the table front using
two (5/16-18 x 1 1/8”) at head screws and two
(5/16-18) hex flange nuts See Figure 4a. One
conical star grounding-washer should be installed
directly in front of one of the screw heads. See
Figure 4b.
2. Attach the rear rail (2) to the table back using
two (5/16-18 x 7/8”) at head screws with spring
washers. See Figure 6. One (5/16”) flat star
grounding-washer should be installed directly in
front of one of the screw heads. See Figure 6a.
NOTE: Use the two aligning holes which are spaced 16”
apart to align the front and rear rails to the table aligning
holes which are also spaced 16” apart.
3. Use supplied rail alignment gauge to ensure the
rail is the proper distance from the top of the table
at each side of the cast iron table. See Figure 5.
Step 3: Front and Rear Rails
- Use Hardware Bag “D”
FIGURE 5
FIGURE 6
FIGURE 4
4a
4b
1
Front RailFront Rail
GAUGE
FRONT
BACK
2
Rear Rail
6a