Manualshelf

Use and Care Manual

ManualsBrandsDelta ManualsPortable Table Saws15 Amp 10 in. Table Saw with 30 in. Rip Capacity, Cast Iron Table and Extension Wings
41424344454647484950
Figure 61
Figure 62
DUST CHUTE CLEAN OUT
1. Remove the hex screw located in the back of the dust
chute, using the supplied 3/16 inch Two-Way Allen Wrench
(L Shape)
HP23
. See Figure 61.
2. Rotate the dust port downward, and clear any sawdust or
woodchips that may be inside the dust chute. See Figure
62.
3. When îš¿nished, rotate the dust port back to its original
position and secure the hex screw back in place.
MAINTENANCE
46