Use and Care Manual

FIGURE 4

ASSEMBLY

FIGURE 3

Attach Support Rod Connection Tube (G) onto the leg assembly from step Figure 2. Secure with M8 x 35mm (1.38”). cap screw ()

and nut (dd).

NOTE: The feet Support Rod Connection Tube (G) should face to the outside (left).

Secure Upper Stand Support Part 2 (I2) to Upper Stand Support Part 1 (pre-attached to saw) with M8 x 75 Carriage Screw (ee),

Plastic Spacer (cc), and M8 Locknut (dd).

12 13