AP-300 10" Contractors Saw (Model 36-978/36-979) Portable Single-Stage Dust Collector Dépoussiéreur portatif à étage unique Recolector de Polvo Portátil de Etapa Sencilla Instruction Manual Manuel d’Utilisation Manual de Instrucciones FRANÇAIS (15) ESPAÑOL (27) www.deltamachinery.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SAFETY GUIDELINES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 GENERAL SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY GUIDELINES - DEFINITIONS It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information. Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
GENERAL SAFETY RULES Failure to follow these rules may result in serious personal injury. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. FOR YOUR OWN SAFETY, READ THE INSTRUCTION MANUAL BEFORE OPERATING THE MACHINE. Learning the machine’s application, limitations, and specific hazards will greatly minimize the possibility of accidents and injury. WEAR EYE AND HEARING PROTECTION. ALWAYS USE SAFETY GLASSES. Everyday eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT.
ADDITIONAL SPECIFIC SAFETY RULES FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY. DO NOT USE THIS UNIT TO FILTER METAL DUST. Combining wood and metal dust can create an explosion or fire hazard. This unit is intended to filter non-explosive atmospheres only. 7. 8. DO NOT USE THIS UNIT TO DISSIPATE FUMES OR SMOKE. Explosions or fire can result. This dust collector is intended for use where only dry airborne dust is present. Its use should be limited to non-explosive, non-metallic atmospheres.
1. All grounded, cord-connected machines: In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This machine is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.
FUNCTIONAL DESCRIPTION FOREWORD The Delta Model AP300 is a portable single stage dust collector. NOTICE: The photo on the manual cover illustrates the current production model. All other illustrations contained in the manual are representative only and may not depict the actual labeling or accessories included. These are intended to illustrate technique only. CARTON CONTENTS 4 1 2 3 5 18 6 12 13 8 10 7 14 15 16 17 18 9 19 1. 2. 3. 4. 5. 6. 7. 8. 9.
ASSEMBLY For your own safety, do not connect the machine to the power source until the machine is completely assembled and you read and understand the entire instruction manual. ASSEMBLY TOOLS REQUIRED 1/2” & 9/16" Open or Box End Wrench - not provided 1/2” & 9/16" Socket and Drive - not provided Flat or Phillips Screwdriver - not provided ASSEMBLY TIME ESTIMATE Assembly for this machine takes approximately 1-2 hours. INSTALLING THE CASTERS 1. Place the dust collector on its side. 2.
INSTALLING THE DUST PORT TUBE AND THE DUST COLLECTOR CONNECTOR Disconnect the machine from the power source! 1. Place the tube clamp (A) Fig. 7 on the lower support tube holder (B). 2. Insert the lower tube support (A) into the tube support holder (B) (Fig. 8). 3. Place a tube clamp (A) on the lower tube support (Fig. 9). A B Fig. 7 A A B Fig. 8 Fig. 9 4. Align the two holes in the intake support angle brace (A) Fig. 10 with the two holes in the intake funnel (B). 5.
8. Place the intake funnel assembly (A) on the lower support tube (B) Fig. 14. Secure it with a tube clamp (C). A C B Fig. 14 ATTACHING THE VACUUM HOSE TO THE DUST COLLECTOR Disconnect the machine from the power source! D 1. Place the intake cap holder (D) on the dust collector (Fig. 15). C NOTE: Do not cover the intake port with the intake cap when attaching the hose to the intake port. 2. Place a hose clamp (A) Fig. 15 on the end of the vacuum hose (B).
ATTACHING THE DUST BAG TO THE DUST COLLECTOR Disconnect the machine from the power source! Loosely thread the end of the dust bag strap (A) through the clamp (B) (Fig. 19). Place the open end of the dust bag (C) Fig. 19 over the outlet flange (D) Fig. 20 . Firmly pull the strap (A) to fasten the dust collection bag to the outlet flange. A A B C D Fig. 18 Fig. 19 OPERATION For operator safety, make certain the dust intake port is covered with the hose before operating the machine.
MACHINE USE This versatile dust collector is light, compact. It can easily be transported for use in and out of the workshop. The dust collector can be used with many different types of woodworking machinery. Fig. 22 illustrates the dust collector used with a router. Note that the intake port has been adjusted to collect dust created by the router. Fig. 23 illustrates the dust collector used with a table saw. Note that the intake port is removed from the lower tube support.
MAINTENANCE Always disconnect the machine from the power source before performing any maintenance procedures. Check the condition of the dust bag periodically for damage. Empty the dust bag on a regular basis. Do not transport the machine with a full dust bag. A Clean and apply a dry silicone lubricant monthly to the impeller to remove any dirt or build-up of pitch, gum and wood shavings. Always make sure that the intake cap (A) Fig. 27 covers the intake port when the hose is not connected to the machine.
WARRANTY To register your tool for warranty service visit our website at www.deltamachinery.com.
The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): Auto-Set®, BAMMER®, B.O.S.S.
