99 Roush Street, Anderson, South Carolina 29625.
MACHINE USE MATERIAL HOLD-DOWN The material hold-down (F) Fig. 7 should contact the surface of the workpiece. To adjust the material holddown, loosen the thumbscrew (D) Fig. 7 and move the rod up or down. The material hold-down must be beveled when the table is beveled. To bevel the material hold-down, loosen the hex screw (E) Fig. 9 and bevel the material hold-down until it is parallel to the table. Retighten the material hold-down before cutting.
1-800-223-7278
1-800-223-7278. .
99 Roush Street, Anderson, South Carolina 29625
1-800-223-7278 99 Roush Street, Anderson, SC 29625
99 Roush Street, Anderson, South Carolina 29625
99 Roush Street, Anderson, SC 29625
99 ROUSH ST ANDERSON, SC 29626 (800) 223-7278 www.DeltaMachinery.