Installation Guide

6
! CAUTION: Risk of injury or product damage.
During installation tempered glass should not
come in direct contact with metal parts or it
may shatter. Gaskets must always be used
in between glass and metal.
Attach hinges to stationary glass panel using a gasket
on both sides of glass, two hinge brackets, and four
screws.
2
3
11
1
1
2
1
1
12
! CAUTION: Risk of injury or product damage.
During installation tempered glass should not
come in direct contact with metal parts or it
may shatter. Gaskets must always be used in
between glass and metal.
Install bottom glass support using a gasket on both sides
of glass, two support brackets, and four screws.
! CAUTION: Risk of injury or product damage.
During installation tempered glass should not
come in direct contact with metal parts or it
may shatter. Gaskets must always be used in
between glass and metal.
Install top glass support using a gasket on both sides of
glass, two support brackets, and four screws.
10
9
B27795 Rev. C
! CAUTION: Door installation requires at least two people.
! CAUTION: Risk of injury or product damage. During installation
tempered glass should not come in direct contact with metal parts or
it may shatter. Gaskets must always be used in between glass and
metal.
Attach glass door to stationary glass panel using a gasket on both sides of
glass, two hinge brackets, and four screws.
The bottom of the door should be parallel to the bottom glass support.
NOTE: If needed, the position of the door can be adjusted by loosening any
of the hinge screws, readjusting the door, and then retightening the screws.