Installation Guide

7
Attach magnetic door gasket to door. Make sure that the bottom
of the magnetic gasket overlaps the sweep gasket.
NOTE: The bottom of the magnetic gasket should touch the glass
support when the door is closed.
Attach door sweep to bottom of glass door. Make sure that the ends
of the gasket are flush with the glass.
! CAUTION: Risk of injury or product damage.
During installation tempered glass should not
come in direct contact with metal parts or it may
shatter. Gaskets must always be used in between
glass and metal.
Attach a gasket and the inner door handle to glass door. Tighten set
screws in handle to secure.
! CAUTION: Risk of injury or product damage.
During installation tempered glass should not
come in direct contact with metal parts or it may
shatter. Gaskets must always be used in between
glass and metal.
Attach outer door handle to glass door using a gasket and two
screws.
1
2
3
16
15
1
14
2
1
13
2
B27795 Rev. C