Installation Sheet

Recessed Fixtures

RECESSED PAPER HOLDER

45070-ST & 45072

TECHNICAL DATA

MATERIALS: Stainless steel recessed shells are stamped from 22 gauge corrosion resistant type 304 stainless steel and are polished or satin.

Projecting posts are die cast from highest quality virgin zinc alloy (Zamak) to meet ASTM standard B-86. Die casts are highly

polished and plated. Roller material as listed under each model number. All rollers are spring actuated.

INSTALLATION: Cut out wall opening 5-1/4" x 5-1/4" x 2" depth. If wood block available install recessed shelf into opening using 2 - #8 x 1-1/4"

flat head nickel or brass plated steel screws provided. If wood blocking is not available use optional RP71072 recessed

wall clamps.

SPECIFICATION: Recessed paper holder shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

6-1/4"

159 mm

127 mm

3-3/4"

95 mm

1-7/8"

47.6 mm

1-3/4"

44 mm

4-7/8"

124 mm

6-1/4"

159 mm

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com

CP4762

PAGE 1
TECHNICAL DATA RECESSED PAPER HOLDER 45070-ST & 45072 Recessed Fixtures 1-3/4" 44 mm 5" 127 mm 3-3/4" 95 mm 6-1/4" 159 mm 4-7/8" 124 mm 6-1/4" 159 mm 1-7/8" 47.6 mm MATERIALS: Stainless steel recessed shells are stamped from 22 gauge corrosion resistant type 304 stainless steel and are polished or satin. Projecting posts are die cast from highest quality virgin zinc alloy (Zamak) to meet ASTM standard B-86. Die casts are highly polished and plated. Roller material as listed under each model number.