Operating Guide

ManualsBrandsDelta Manuals4 inch Centerset Sink FaucetsClassic 4 in. Centerset Single-Handle Bathroom Faucet in Chrome

SILICONE

Icons

SINGLE HANDLE BATHROOM

CENTERSET FAUCETS

LLAVES MONOCONTROL DE

MONTURA DE CENTRO PARA

LAVAMANOS

ROBINETS À ENTRAXE

COURT À UNE POIGNÉE

Para instalación fácil de su llave

Delta

usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and maintenance

information.

SILICONE

Icons

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

SILICONE

Icons

SILICONE

Icons

Pour installer votre robinet Delta

facilement, vous devez:

• LIRE TOUTES les instructions avant

de débuter;

• LIRE TOUS les avertissements ainsi que toutes

SILICONE

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

06/18/2020 Rev. S

1/8"

54195

Models/Modelos/Modèles

500-DST, 501-DST, 501M-DST, 502-DST,

520-DST, 520-A-DST, 520M-MPU-DST,

521-DST, 521-DST-A, 522-DST & 522-A-DST

www.deltafaucet.com

Summary of content (12 pages)

PAGE 1
54195 SINGLE HANDLE BATHROOM CENTERSET FAUCETS LLAVES MONOCONTROL DE MONTURA DE CENTRO PARA LAVAMANOS Models/Modelos/Modèles 500-DST, 501-DST, 501M-DST, 502-DST, 520-DST, 520-A-DST, 520M-MPU-DST, 521-DST, 521-DST-A, 522-DST & 522-A-DST ROBINETS À ENTRAXE COURT À UNE POIGNÉE Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici.
PAGE 2
1 A 500-DST, 501-DST, 502-DST, 520-DST 521-DST & 522-DST A 501M-DST & 520M-MPU-DST 1 1 2 2 B. B. RP54899 NOT INCLUDED WITH FAUCET 1 1 NO INCLUIDOS CON LA LLAVE DE AGUA 1 1 NON INCLUSES AVEC LE ROBINET 2 2 500-DST, 501-DST, 502-DST, 520-DST 521-DST & 522-DST Series 501M-DST & 520M-MPU-DST Series A Position faucet (1) and gasket (2) on sink. Option: If sink is uneven, use silicone under the A Position faucet (1) and gasket (2) on sink.
PAGE 3
2 A. B. OR 2 O 1 3 Standard Connections B. Ensure all fittings and end connections are free of debris. Faucet fittings (1) are 3/8" compression. Loop tubing (2) if it is too long. Note: Recommended tubing minimum bend diameter is 8". Secure metal nut (3) to supply valve connection (4). Turn nut until it feels snug. Then tighten nut at least 2 more turns with a wrench. Repeat for other tube. Turn on water, examine for leaks. A.
PAGE 4
Correct method Método Correcto Bonne méthode Incorrect Installation Instalación Incorrecta Installation Incorrecte 2 3 1 4 NOTICE Failure to use plastic sleeve (ferrule) in the correct orientation will result in disconnection and possible water damage. 1. Determine desired length of supply tube (1). Leave 1" or 2" of extra length to allow for easier installation and cut tube. Ensure cut is straight and burr free. 2. Slide nut (2) and plastic sleeve (ferrule) (3) onto cut supply tube.
PAGE 5
B E. D. C 1 IC O S IL NE 3 A. 1 2 3 2 3 2 1 1 1 F. G. 4 2 2 H. 5 4 3 5 2 2 1 3 1 1 2 6 (Follow the instructions for the type of pop-up included with your model.) Metal Pop-Up A Remove stopper (1) and flange (2). B Screw nut (1) all the way down. Push washer (2) and gasket (3) down. C Remove tailpiece (1) from body (2), add plumber’s tape (3), replace tailpiece. D Apply silicone to underside of flange (1). Insert Step 3b E Pivot (1) must face faucet.
PAGE 6
C. B. A. 1 3 3 1 2 1 2 4 4 E. D. F 4 3 4 2 5 2 3 1 2 1 3 4 5 1 6 (Follow the instructions for the type of pop-up included with your model.) Pop-Up with Metal Flange and Plastic Tail Piece A Remove stopper (1), brass nut & washer (2), black gasket (3) and tail piece (4). B Apply silicone to underside of flange (1). Insert flange into sink.
PAGE 7
A. 4 B. 1 1 3 2 1 4 4 3 3 2 2 D. C. 4 3 5 5 4 4 2 3 2 4 1 1 6 (Follow the instructions for the type of pop-up included with your model.) Plastic Pop-Up A Remove stopper (1) and flange (2). Screw nut (3) all the way down. Push gasket (4) down. B Apply silicone to underside of flange (1). Insert body (2) into sink. Screw flange onto body. Pivot hole (3) must face back of sink. Pull assembly down firmly and hold in place. DO NOT TWIST. Tighten nut (4), remove excess sealant.
PAGE 8
5 1 2 Setting The Handle Limit Stop (Optional) because it limits the amount of hot water in the mix; however, this handle limit stop will not always prevent scalding because it does not compensate for incoming pressure or sudden water temperature changes. This faucet includes an integrated handle limit stop that has two positions. Position 1, to the left, allows full handle motion (the full range between “all cold” to “all hot”). The faucet is set in position 1 in the factory.
PAGE 9
4 5 3 1 2 Maintenance If faucet exhibits very low flow: A. Remove and clean Aerator (1) with supplied wrench (2), or B. SHUT OFF WATER SUPPLIES. Replace valve cartridge (3). When reinstalling parts, make sure bonnet nut (5) is tightened securely with a wrench.* If faucet leaks from under handle: Remove handle and unthread trim cap (4). Using a wrench, ensure bonnet nut (5) is tight. If leak persists–SHUT OFF WATER SUPPLIES. Replace valve cartridge (3).
PAGE 10
54195 Rev.
PAGE 11
54195 Rev.
PAGE 12
Limited Warranty on Delta® Faucets Parts and Finish. All parts (other than electronic parts and batteries) and finishes of Delta® faucets purchased from authorized Delta sellers are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed.