Specification Sheet

Bedpan Cleansers
In-Wall Volume Control Valve with integral stop
Model No: 54T1231
SPECIFICATION:
•
In-wall volume control valve
•
cast brass
•
integral stop
•
TUF-TECK® institutional structure
•
90% flow with first 1/4 turn of operation
•
Positive shutoff even in poor water conditions
•
Polished chrome plate finish, exposed metal trim
•
70mm (2 3/4") Lever blade handle ADA compliant, metal, color-indexed with
Vandal Resistant (VR) screws
•
1/2" FIP inlet/outlet on valve
•
Spout#: 3 - 5.25" long wallmount rigid spout
•
With brass spray holder
•
Elevated wallmount angle vacuum breaker
•
Outlet#: 1 - Spray bedpan outlet(less stop)
•
with insulated handle
•
1500mm (59") long reinforced PVC/Polyurethane hose
•
Integral anti-drip check
COMPLIES WITH:
•
CSA certified.
•
Complies to ASME A112.18.1/CSA B125.1
•
Handle Control Nos. 1 and 2, plus Foot Pedal Control No. 4 meet ADA
compliance to ICC/ANSI A117.1/ADA
•
Angle vacuum breaker certified under ASSE Standard 1001 and CSA
Standard B64.1.1
•
(Contact Delta Representative for State and/or Local Approvals)
(Dimensional drawing on following page)
•
Not Available
OPERATION:
Delta reserves the right (1) to make changes to specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference.
Measurement may vary plus or minus 6mm(0.25"). Mounting locations are suggested only. Check with local codes for requirements in your area. This spec was produced January 06, 2017.
- 1.0.25277
Page of1 2
Delta Faucet Company - 55 East 111th St. - Indianapolis, Indiana, USA 46280 - [phone]
Delta Faucet Canada - 395 Matheson Blvd E - Mississauga, Ontario, Canada L4Z 2H2 - [phone]